SSlmixed.com Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
SMF - Just Installed!
Home
Help
Search
Login
Register
SSlmixed.com Forum
»
Tech discussion
»
4K,6K,8K Series
(Moderator:
sintech
) »
026 Card Edge connectors does anybody have a part #?
« previous
next »
Send this topic
Print
Pages: [
1
]
Author
Topic: 026 Card Edge connectors does anybody have a part #? (Read 2070 times)
xmax
Sr. Member
Posts: 284
Karma: +10/-3
026 Card Edge connectors does anybody have a part #?
«
on:
June 28, 2017, 05:55:26 PM »
026 Card Edge connectors does anybody have a part #?
or the pin spacing or series of connectors? A client
has a intermittent connection and cleaning and reseating
is not fixing them...
Logged
xmax
Sr. Member
Posts: 284
Karma: +10/-3
Re: 026 Card Edge connectors does anybody have a part #?
«
Reply #1 on:
July 03, 2017, 07:48:40 PM »
Nothing?
Logged
Chris Simon
Jr. Member
Posts: 98
Karma: +5/-0
Re: 026 Card Edge connectors does anybody have a part #?
«
Reply #2 on:
July 04, 2017, 03:18:15 PM »
Something similar to this?
https://www.digikey.ca/products/en/connectors-interconnects/card-edge-connectors-edgeboard-connectors/303?k=&pkeyword=&FV=fffc0023%2C16000b8%2C1640001%2C1680002%2C8600004%2Cffe0012f%2C1140050&mnonly=0&ColumnSort=0&page=1&stock=1&quantity=0&ptm=0&fid=0&pageSize=25
I know the pin spacing is 0.1", not sure if the row spacing of 0.2" is correct. I haven't used these connectors in a 651, but I used them for edge connectors on a SL612 test jig.
Chris
Logged
xmax
Sr. Member
Posts: 284
Karma: +10/-3
Re: 026 Card Edge connectors does anybody have a part #?
«
Reply #3 on:
July 19, 2017, 04:05:20 AM »
Rad! Thanks! N
Logged
xmax
Sr. Member
Posts: 284
Karma: +10/-3
Re: 026 Card Edge connectors does anybody have a part #?
«
Reply #4 on:
August 01, 2017, 01:55:25 PM »
These worked! They did need the mounting tabs removed
and 2 pins pulled to add a "key" for the card key-way.
otherwise the cards edge pins can touch 2 contacts at
once and short every single pin! I cut a small piece of
old PCB to make the "key".
Logged
Chris Simon
Jr. Member
Posts: 98
Karma: +5/-0
Re: 026 Card Edge connectors does anybody have a part #?
«
Reply #5 on:
August 01, 2017, 09:29:34 PM »
I made my keys out of small pieces of plastic that I carved and glued in place. Glad it worked out.
Chris
Logged
xmax
Sr. Member
Posts: 284
Karma: +10/-3
Re: 026 Card Edge connectors does anybody have a part #?
«
Reply #6 on:
August 02, 2017, 03:03:59 AM »
No thank you!
Logged
Send this topic
Print
Pages: [
1
]
« previous
next »
SSlmixed.com Forum
»
Tech discussion
»
4K,6K,8K Series
(Moderator:
sintech
) »
026 Card Edge connectors does anybody have a part #?