026 Card Edge connectors does anybody have a part #?

[xmax]

026 Card Edge connectors does anybody have a part #?
or the pin spacing or series of connectors? A client
has a intermittent connection and cleaning and reseating
is not fixing them... 

[xmax]

Nothing?

[Chris Simon]

Something similar to this?

https://www.digikey.ca/products/en/connectors-interconnects/card-edge-connectors-edgeboard-connectors/303?k=&pkeyword=&FV=fffc0023%2C16000b8%2C1640001%2C1680002%2C8600004%2Cffe0012f%2C1140050&mnonly=0&ColumnSort=0&page=1&stock=1&quantity=0&ptm=0&fid=0&pageSize=25

I know the pin spacing is 0.1", not sure if the row spacing of 0.2" is correct. I haven't used these connectors in a 651, but I used them for edge connectors on a SL612 test jig.

Chris

[xmax]

Rad! Thanks! N

[xmax]

These worked! They did need the mounting tabs removed
and 2 pins pulled to add a "key" for the card key-way.
otherwise the cards edge pins can touch 2 contacts at
once and short every single pin! I cut a small piece of
old PCB to make the "key". 

[Chris Simon]

I made my keys out of small pieces of plastic that I carved and glued in place. Glad it worked out.

Chris

[xmax]

No thank you!