I tested them all out, most are good, i had to "tighten" one of the meters connectors and got it back up and running properly. Im at 95% plasmas working right... I also have 20 Spares and 25 "Tubes" as spares to that...
I also recapped the meter distribution card and the power cards section for the plasmas... just incase....
The master meter is still pinned and i've fixed its connections, re capped it, checked it out as much as possible.. im at a loss...
VUs work fine without that particular plasma connected via signal... Its acting like it has a full tilt signal...weird.
Side note, my phase meter is acting weird and hanging to the right and bouncing around during playback.. not sure why that might be...