Author Topic: Channel Dynamics link not working across the center section (ch 24 -<> 25) 4k/8k  (Read 1938 times)

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Channel Dynamics Linking not working across the center section (ch 24 -<> 25)

does anyone know how to get his going?

best
Roy

Clip6

  • Sr. Member
  • ****
  • Posts: 284
  • Karma: +8/-1
Hey Roy. I think in the download is a complete ssl data pdf.

« Last Edit: November 02, 2017, 02:49:26 PM by Clip6 »

amillar

  • Full Member
  • ***
  • Posts: 181
  • Karma: +15/-0
    • United Kingdom
From memory I think this is a "feature" - pin 1 of S4 on the upper bus card I seem to remember doesn't carry across the centre section? You could bodge a wire across if you're desperate to have this!

Have you got split cues?

Cheers, Andy
co-designer and project manager G series analogue 1987
channel strip designer J series 1992-93
design "caretaker" 4000/6000 1985-93
analogue team leader ARC/Bertha 1988-92

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Thanks amillar!

helps a lot!

Best

Roy

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
amillar,

Do you happen to remember if the was a missing pin from that ribbon or was it a link on bus card?

i don't have split cues on this desk..
thanks!

Roy

amillar

  • Full Member
  • ***
  • Posts: 181
  • Karma: +15/-0
    • United Kingdom
Hi Roy,
Sorry, I wasn't ignoring you, I've just been working silly hours for the last fortnight!
Unfortunately I can't remember, must be to do with the way the ribbons connect to the 651?
Cheers,
Andy
co-designer and project manager G series analogue 1987
channel strip designer J series 1992-93
design "caretaker" 4000/6000 1985-93
analogue team leader ARC/Bertha 1988-92

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
OK so I figuerd it out! :D

it turns out to be a link (jumper) on the right side of the LEFT of center section upper bus card
and also on the left side on the RIGHT of center section buscard.
adding these two jumpers joins the DYN link across the center section.

hope this helps someone in the future.

Best,

Roy

Clip6

  • Sr. Member
  • ****
  • Posts: 284
  • Karma: +8/-1
Great. Heard you on the podcast last week.

https://youtu.be/xXTtAZa8xDA
« Last Edit: December 10, 2017, 07:16:24 PM by Clip6 »

marcmozart

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +29/-0
    • Frankfurt/Germany
    • Mozart & Friends
Great. Heard you on the podcast lastweek.

Podcast? What podcast?
1992 SSL 4048 G-Series
Mix Engineer Blog
http://www.mixedbymarcmozart.com