« previous next »
Pages: [1] 2

Author Topic: SL4000 Total Recall - Every other channel displaying wrong number in recall  (Read 4395 times)

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
SL4000 Total Recall - Every other channel displaying wrong number in recall
« on: January 18, 2019, 02:15:43 PM »
Hi There,
here is a strange one for you :
Every other channel displaying wrong channel number in recall display - automation does not have this problem.

problem also seen in TR (desk monitor) when you swap a track .

also !test -> TR -> 'Display object values ' does not have this problem .

any ideas?

See attached image


R



« Last Edit: May 18, 2019, 05:15:04 AM by RoyMixer »
Logged

waltzingbear

  • Sr. Member
  • ****
  • Posts: 329
  • Karma: +13/-0
    • Portland, Oregon
    • Waltzing Bear Audio
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #1 on: January 18, 2019, 07:04:07 PM »
do you have the "channel ID" turned on in the software? You do know that the channel modules are coded with a number assignable on the card at the bottom of the module?

Swap a channel, change the number if you have that turned on.

otherwise, it gets confused.

Cheers
Alan
Logged
Alan Garren
Waltzing Bear Audio

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #2 on: January 18, 2019, 07:06:05 PM »
Thanks Alan for the reply!

I checked and the desk is set to ignore dip switches :

Best,
Roy
Logged

Clip6

  • Sr. Member
  • ****
  • Posts: 288
  • Karma: +8/-1
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #3 on: January 21, 2019, 12:56:35 AM »
Roy did reprogramming the fader map help?
Logged

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #4 on: January 21, 2019, 04:19:25 AM »
HI!

Thanks for your suggestion.

you mean  re-selecting he objects?  I re-did that, same issue.

the automation seems fine, just not the recall.  I am starting to wonder if its the  if one TR multiplex address lines are messed up.

R
Logged

Dan Korneff

  • Jr. Member
  • **
  • Posts: 76
  • Karma: +1/-0
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #5 on: January 22, 2019, 11:53:25 AM »
I've seen something similar happen with my console. My issues ended up being a multiplexer ribbon being half way unplugged. It didn't change every other channel like yours, but random channels would be labled as 100+ and some of my stereo channels would show as mono.
Logged

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #6 on: January 25, 2019, 02:40:40 PM »
THanks Dan!
Logged

Clip6

  • Sr. Member
  • ****
  • Posts: 288
  • Karma: +8/-1
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #7 on: March 30, 2019, 08:08:03 PM »
Roy what was the fix on this?
Logged

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #8 on: March 30, 2019, 08:13:30 PM »
Hi Clip6,

I have not found a solution.  i tried unplugging each side of the LHS and RHS S9E to see of there was problem with the TR mux busses.  no help there.
i have to investigate more .. are you having this issue??
R
Logged

Clip6

  • Sr. Member
  • ****
  • Posts: 288
  • Karma: +8/-1
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #9 on: March 30, 2019, 11:22:02 PM »
Hey. So your at PS right? What did the old time SSL techs say?

Your not short on tech talent where you are.

It would be good to know the solution if it comes up for someone else in the future.

 8)
Logged

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #10 on: March 31, 2019, 12:32:28 AM »
What is your symptom?   I've asked people around NYC and no one seems to know anything.

I wish i knew and ex SSL TR expert.
R
Logged

Clip6

  • Sr. Member
  • ****
  • Posts: 288
  • Karma: +8/-1
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #11 on: March 31, 2019, 04:28:31 AM »
Maybe Phil Scholes "thatstudioguy" on instagram can help.

This is Roy H I assume.
Logged

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #12 on: March 31, 2019, 04:50:24 AM »
Good Idea,

Yes Roy H.
Logged

Clip6

  • Sr. Member
  • ****
  • Posts: 288
  • Karma: +8/-1
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #13 on: March 31, 2019, 05:25:59 AM »
Phil is ex-SSL

Also http://www.virtualearthaudio.com/index.html

This is Phil Nicolay another ex-SSL named Phil.
Logged

RoyMixer

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-0
    • NYC
    • Roy Hendrickson, Mixer/Engineer/Producer
Re: SL4000 Total Recall - Every other channel displaying wrong number in recall
« Reply #14 on: March 31, 2019, 05:30:43 AM »
Spoke to him, great guy he says he may have been part of building my particular desk.

He is amazing, has taken care of much for me over the years.

R
« Last Edit: March 31, 2019, 01:23:28 PM by RoyMixer »
Logged
Pages: [1] 2
« previous next »