Author Topic: Show us your console/studio  (Read 22332 times)

jimlfixit

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 356
  • Karma: +44/-0
    • Maidenhead, Bucks, UK
Gabriel O red trim SSL console
« Reply #15 on: September 24, 2012, 12:16:19 AM »
I love this red finish and I remember one being made but can't recall who originally bought it. In my time at SSL there were a few custom trim versions in different colours. Sometimes, even all the metalwork was a different colour (there was at least one in blue).

At least a few consoles had wooden trims which also look very nice. I think Jay Kay (Jamiroquai) has one, thanks to Al Smart.

All these different finishes make the console stand out and these pictures prove that.

Jim Lassen (www.profcon.co.uk). I'm a wiring kinda guy by the way if you need any of that stuff (patchbays, wiring, connectors and panels).
« Last Edit: December 19, 2013, 01:46:14 PM by jimlfixit »

GabrielO

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
    • Studio JORK
Re: Show us your console/studio
« Reply #16 on: September 24, 2012, 03:56:20 PM »
Thank you Jim ;)

jimlfixit

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 356
  • Karma: +44/-0
    • Maidenhead, Bucks, UK
Re: Show us your console/studio
« Reply #17 on: September 24, 2012, 11:36:32 PM »
Great pictures of consoles chaps (Mattia, Stefan and Gabriel so far) but, as a wiring person, I have to say that some of the cabling underneath the SSL on the floor is a bit untidy. Perhaps get some trunking so all the wiring is hidden and looks pretty.

Mark Mozart, we have been in contact before so perhaps you may like to show some pictures of your console as well as I know you have done a big refurb and cleaning job on it.

I admire all you techies for spending the time recapping and cleaning your consoles as it must take a long time to do. In the short time this site has been live, I can tell that there are a lot of very passionate SSL users out there around the world. I'll do my best to support that from a wiring point of view.

I'm impressed with what I have seen so far so, keep up the good work (and maybe tidy some of those cables up!).

Jim Lassen, Bucks, UK (www.profcon.co.uk).

StefanNowak

  • Full Member
  • ***
  • Posts: 216
  • Karma: +5/-1
    • Sydney, Australia.
Re: Show us your console/studio
« Reply #18 on: September 26, 2012, 10:54:38 AM »
Guilty I'm afraid.

My place is a little tidier. But unfortunately there are no troughs for cables at my place.

Stef.

Audioplatinum Service

  • Jr. Member
  • **
  • Posts: 59
  • Karma: +9/-0
    • Zagreb, CROATIA
    • Embrio Production Studio
Re: Show us your console/studio
« Reply #19 on: October 25, 2012, 05:13:23 PM »
Hello everybody!

I am Raf, and I am new on forum....
We have small studio in Croatia near to Zagreb with this red beauty...



This is 4040 with FilmPan and some other modifications.



Raf
http://embrioproduction.com
"A clean desk is the sign of a sick mind..."

tko

  • Newbie
  • *
  • Posts: 31
  • Karma: +0/-0
Here's my baby in NZ.
« Reply #20 on: December 13, 2013, 09:37:49 PM »
Here's my baby 4024 from PG's Real World. I love the small format and I've got a great hybrid rig running. This photo is a couple of years old and the room is configured slightly different now.  Go SSL!! TKO
« Last Edit: December 15, 2013, 03:28:14 AM by tko »

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Show us your console/studio
« Reply #21 on: December 14, 2013, 12:13:41 AM »
VERY NICE VIBE !

is the engineer asleep?  ;)

ooooh it happens: "yeah, let's do another take.."

Mattia

Dirk Stephan

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • Germany, 55585 Norheim
    • https://www.facebook.com/musicmediagroup.de
Re: Show us your console/studio
« Reply #22 on: December 18, 2013, 03:43:55 PM »
here is my baby in green led light !





see you
dirk

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Show us your console/studio
« Reply #23 on: December 19, 2013, 02:24:02 AM »
here is my baby in green led light !

see you
dirk

Beautiful!
what are the Big Speakers? dynaudio?

Mattia.

jimlfixit

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 356
  • Karma: +44/-0
    • Maidenhead, Bucks, UK
SSL console finishes and colours
« Reply #24 on: December 19, 2013, 12:08:39 PM »
Hi all

I love the blue, red and even green themes for these SSL consoles and CR's (control rooms). Mostly from Germany for some reason apart from versions from Slovenia and Croatia I think.

Has anyone got a wood finish console to show us (I know of at least two out there in oak or ash and there are more)? Also love the Duality pictures (I haven't seen one close up before).

So far, Stefan N has the biggest (!) but, any more huge ones to show (I mean consoles of course)? Stefan, as a wiring kinda guy, I notice all the cables under the console (I've mentioned this before). Get some form of trunking to tidy them up a bit dude otherwise I'll have to be a stow away on a ship (2 months?) or hide in an aircraft wheel compartment (36 hours if I don't freeze to death or drop out!) to get to your studio eventually and sort it out.

Regardos everyone from Jim Lassen (heck, I've got another Karma point ... watch out Andy!)
« Last Edit: December 19, 2013, 01:56:19 PM by jimlfixit »

Riff Raff

  • Newbie
  • *
  • Posts: 30
  • Karma: +0/-0
    • Salaise sur Sanne, France.
Re: Show us your console/studio
« Reply #25 on: October 01, 2014, 08:34:49 PM »
Hi guys,
I'm happy to join the team.
Love from France.
Raphaël Cartellier


sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Show us your console/studio
« Reply #26 on: October 01, 2014, 08:59:28 PM »
Perfect Studio Raphaël :-)))

tko

  • Newbie
  • *
  • Posts: 31
  • Karma: +0/-0
Re: Show us your console/studio
« Reply #27 on: January 22, 2017, 12:13:17 PM »
Hi all, it's been a while since I've been here and forgot how great this community is. I spent most of last year building my new studio so I've been catching up on all things SSlmixed tonight. Here's a shot of my SSL in her new resting place in our CR  which sounds fantastic - it was designed and build throughly...so I'm more passionate about the console than before. I can't wait for the SSlmixed Computer. Thanks for all the SSL love and work everyone. TKO - Wellington, NZ.
« Last Edit: January 22, 2017, 12:19:25 PM by tko »

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Show us your console/studio
« Reply #28 on: January 22, 2017, 11:21:35 PM »
Hi all, it's been a while since I've been here and forgot how great this community is. I spent most of last year building my new studio so I've been catching up on all things SSlmixed tonight. Here's a shot of my SSL in her new resting place in our CR  which sounds fantastic - it was designed and build throughly...so I'm more passionate about the console than before. I can't wait for the SSlmixed Computer. Thanks for all the SSL love and work everyone. TKO - Wellington, NZ.

Great to have you around and thank you for the kind words TKO!
there is a section on our facebook page if you want to post your picture there!

https://www.facebook.com/pg/SSLmixed/photos/?tab=album&album_id=945521715582800

Matt Sartori

puhec

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • Slovenija
    • RSL PRODUCTION
Re: Show us your console/studio
« Reply #29 on: April 28, 2017, 11:43:40 PM »
Well hello to all owners of SSL.

Here is our small ssl sl9000j located in Slovenia in studio RSL Production.




have a great mixing and recording on your ssl's.

Cya

www.rsl-production.com