Author Topic: Channels to Meters mod for E Series  (Read 6354 times)

Tonemiester

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +0/-0
    • Denver
Channels to Meters mod for E Series
« on: February 28, 2019, 04:49:22 PM »
I have heard that there was a mod that could switch meter source from monitor to channels on E series. Does anybody have any knowledge about this and if so, is it complicated? Any insight will be greatly appreciated.

Thanks,

xmax

  • Sr. Member
  • ****
  • Posts: 284
  • Karma: +10/-3
Re: Channels to Meters mod for E Series
« Reply #1 on: March 01, 2019, 04:25:56 AM »
A small pcb was added to the channel so unfortunately it's not a simple mod.

Tonemiester

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +0/-0
    • Denver
Re: Channels to Meters mod for E Series
« Reply #2 on: March 01, 2019, 03:14:10 PM »
Ah, OK. Thanks!

MarconeMusic

  • Full Member
  • ***
  • Posts: 184
  • Karma: +3/-0
    • Halomusic.ca
Re: Channels to Meters mod for E Series
« Reply #3 on: March 05, 2019, 01:43:49 AM »
I have these in some of my channels.

Is this something we could clone for those who need? It seems like a simple PCB and basic parts. . .

Just throwing that out there for ya. . .

Tonemiester

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +0/-0
    • Denver
Re: Channels to Meters mod for E Series
« Reply #4 on: March 05, 2019, 03:48:46 PM »
Would you be able to pull one and take pictures front and back?

Thanks,

SubspaceSound

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • The Greenhouse
Re: Channels to Meters mod for E Series
« Reply #5 on: March 07, 2019, 04:52:34 AM »
I can get some pictures of the card posted tomorrow. It's just a few passives and an op-amp on a PCB, plus a ribbon cable that snakes all over the channel. Some fun-hating studio did a lot of work to disable the system on my console, but I'll see what I can find about the switching.

Tonemiester

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +0/-0
    • Denver
Re: Channels to Meters mod for E Series
« Reply #6 on: March 07, 2019, 03:29:44 PM »
Thanks much!

SubspaceSound

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • The Greenhouse
Re: Channels to Meters mod for E Series
« Reply #7 on: March 07, 2019, 09:24:18 PM »
For some reason adding attachments to my post sends me to a blank page. Look around for info on the 82E189 card, that's the meter switcher unit... maybe someone here has pages on it in their service manual.

MarconeMusic

  • Full Member
  • ***
  • Posts: 184
  • Karma: +3/-0
    • Halomusic.ca
Re: Channels to Meters mod for E Series
« Reply #8 on: March 11, 2019, 01:18:14 AM »
Ill Try and make a few shots for ya tomorrow.


Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Channels to Meters mod for E Series
« Reply #9 on: March 14, 2019, 05:41:44 PM »
For some reason adding attachments to my post sends me to a blank page. Look around for info on the 82E189 card, that's the meter switcher unit... maybe someone here has pages on it in their service manual.

Try a different browser, but I always recommend using an external link.
I am going to set up a Drop box for people to use.

Matt

MarconeMusic

  • Full Member
  • ***
  • Posts: 184
  • Karma: +3/-0
    • Halomusic.ca
Re: Channels to Meters mod for E Series
« Reply #10 on: March 14, 2019, 07:54:51 PM »
I cant send my pics either.. Ugh

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Channels to Meters mod for E Series
« Reply #11 on: March 15, 2019, 11:23:03 AM »
I cant send my pics either.. Ugh

it should be working now!
the limit is 2.5MB per picture for a maximum of 10MB per post.
so it's a maximum of 4x 2.5MB pictures on each post.

Please see my long term solution for documents here

http://forum.sslmixed.com/index.php/topic,1433.0.html

Matt Sartori

MarconeMusic

  • Full Member
  • ***
  • Posts: 184
  • Karma: +3/-0
    • Halomusic.ca
Re: Channels to Meters mod for E Series
« Reply #12 on: March 15, 2019, 02:20:05 PM »
Just an FYI,

My pics wouldnt send because of the size limit.. but when i reduced them on my phone to a lower res and cropped them.. htey wouldnt send because theyre now .jpeg? which isnt an extension that is valid.. ?

Dunno..

Tonemiester

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +0/-0
    • Denver
Re: Channels to Meters mod for E Series
« Reply #13 on: March 15, 2019, 02:42:31 PM »
That stinks! Can you send them to my email? Thanks for trying.

Mike

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Channels to Meters mod for E Series
« Reply #14 on: March 18, 2019, 11:29:10 AM »
Just an FYI,

My pics wouldnt send because of the size limit.. but when i reduced them on my phone to a lower res and cropped them.. htey wouldnt send because theyre now .jpeg? which isnt an extension that is valid.. ?

Dunno..

please try again now.

Matt Sartori