Tech discussion > Wiring

An example of a 4K DL32 wiring

(1/2) > >>

jimlfixit:
One example of an SSL DL 32 loom (Stereo 1-5 record and replays) I recently made for a client in Greece (Ilias, who I think is on here).

This one uses a 16 pair Van Damme cable to/from a 96 way DL and having 2 lots of XLR’s, 1 lot of balanced jacks and the last 4 circuits used for unbalanced Phono (RCA) replays only.

They are all split at the end, twisted for 2m and rubber sleeved near the ends which can be moved back if required.

The labelling is the patchbay references (ie M25, N31 etc). There is no point labelling a wire with a description of a make of equipment on it as there is no reference back to a patchbay jack position.

Bear in mind that, when you wire these 5 stereo records out to equipment, the SSL patchbay is linked between all 5 so, if one of those items of equipment is unbalanced, the WHOLE lot will be as well.

If you want one of these made, I can do it and have most of the parts in stock so, get in contact (profcon@btinternet.com).

Check out my Facebook site (shown below) for more examples of my wiring work.

When you view the picture, click the IMG description, rather than the picture, otherwise it will appear too big when you view it.

horizonsound:
Beautiful work Jim,

What do you use for cable labelling?
I've never done it before (no need to), but have a couple of MRACs to wire up from scratch, which could get messy otherwise.

Anthony.

jimlfixit:
Hi Anthony
Thank you for your kind comment regarding my DL 32 example. There are more examples to post shortly which I have completed now.

The yellow labels I use for DL's and 25 way D's are produced on my computer using Excel software (along with patchbay labels). I will do another post on this shortly as it needs attention but is easily sorted.

Anyway, the individual circuit labels I used for this are the Brady WM vinyl cloth label which SSL used to use many years ago. I bought all their stock when they changed to their own version using a dot matrix printer to print out M35 (for instance) in one label as opposed to 3 labels (M+3+5).

The cable shown is Van Damme Blue series which is common in the UK but less so elsewhere. This loom is done just as twisted pairs etc without any extra sheathing. Everyone has a budget and I could have completed this with extra sheathing but it was more of a cheaper version as defined by the client's cost constraints. This should be fine and by twisting individual circuits together, it makes the circuits more rigid but still flexible.

MRAC cables (2 x 104 way's ... M1 and 2) have cables to and from the 651 and they mainly go to and from the patchbay. MRAC parts seem hard to find but I think they are Amphenol connectors.

Someone on here will have MRAC pinouts (I have some) but, if you have loose MRAC looms, they need documenting so you can re-connect them to the patchbay, DL connectors or elsewhere.

Let me know if you need any wiring constructed and check out my wiring FB page as shown below.

jimlfixit:
Hi Anthony

Further to my last post, send me some pictures of your MRAC wiring and any documentation so I can advise a bit. (profcon@btinternet.com).

I won't spend long on this as time is money (literally need to pay the rent) but can possibly quickly advise and we can all learn a bit more. I think I know already but it would be interesting to see some close up pictures with details.

horizonsound:
Hey Jim,

Once again, excellent information on the wire labelling!! Van Damme is not as widely used in Australia, and seems to be mainly Mogami or Canare. I personally prefer the Mogami for multipin connectors due to having a bit more flexibility. The current system I have is all on EDAC 90/56 connectors, which was so much fun to wire up (/sarcasm). I'll be keeping all of the EDAC system, and converting the DLs as needed.

My 651 is only about to get loaded on to a boat (with a whole lot of other parts), not arriving here until September. Such is now the anxious waiting with seafreight.
So, there is a lot of time to do some research and work all this out.

The existing 4000G service manual details the pinout of the MRACs, and it's very detailed in that it give the pin number, function, and row where it terminates on the patchbay, etc..Hopefully it is easy to work out, but I will be taking a lot of photos / video during this process for everyone to look at.

The grounding of this seems a dark art, as it appears only hot and cold are terminated at the patchbay, like the BICC connectors on the bucket motherboards.

I'll need to talk to you about getting some patchbays and parts, after all this arrives and I can take stock of what I need.

Anthony.

Navigation

[0] Message Index

[#] Next page