Author Topic: Project Status Update 9-08-2015  (Read 4713 times)

Artur D'Assumpção

  • Moderator
  • Hero Member
  • *****
  • Posts: 661
  • Karma: +23/-0
  • Sintra, Portugal
Project Status Update 9-08-2015
« on: August 09, 2015, 09:06:45 PM »
Hi guys,

Just to let you know we had a small pause for holidays and we're back to work on the new system.

Here are some photos of the new DIY VCA I/O beta card. We'll post more photos soon with it fully assembled. We'll be also testing it during the following weeks, so cross fingers! ;)

Cheers,

Artur

Dan Korneff

  • Jr. Member
  • **
  • Posts: 76
  • Karma: +1/-0
Re: Project Status Update 9-08-2015
« Reply #1 on: August 11, 2015, 05:45:18 PM »
yes!

Artur D'Assumpção

  • Moderator
  • Hero Member
  • *****
  • Posts: 661
  • Karma: +23/-0
  • Sintra, Portugal
Re: Project Status Update 9-08-2015
« Reply #2 on: August 12, 2015, 10:05:13 AM »
This card design is much much powerful than the previous one. We are very thrilled! Here is some of the highlights:

- We are now using one 1x AD + 8 x DA + Opamps per channel (instead of using the Sample&Hold approach)
- We now have an independent microcontroler per card
- We now have power rails for 5v Analog, 5v Digital and 12v which are isolated and self-regulated directly on each card
- Motherboard now has power up/power down control over the card
- VCA Cuts are now detected by digital threshold and are set by a fast digital switch (instead of detector+transistor circuit) - VCA ONLY
- Card can now be totally tested and driven without the need of motherboard (for testing purposes) - completely independent from the motherboard
- Card can now have a serial interface which will allow for comprehensive testing/debugging interface

Cheers,

Artur

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Project Status Update 9-08-2015
« Reply #3 on: August 12, 2015, 11:12:24 AM »
ABSOLUTELY AWESOME work guys!!!

Mattia.

Artur D'Assumpção

  • Moderator
  • Hero Member
  • *****
  • Posts: 661
  • Karma: +23/-0
  • Sintra, Portugal
Re: Project Status Update 9-08-2015
« Reply #4 on: August 12, 2015, 02:01:18 PM »
THanks Mattia!

I believe very very soon we might have wonderful things to show! ;)

ehehehe!


Artur D'Assumpção

  • Moderator
  • Hero Member
  • *****
  • Posts: 661
  • Karma: +23/-0
  • Sintra, Portugal
Re: Project Status Update 9-08-2015
« Reply #5 on: September 05, 2015, 10:45:16 PM »
Hi guys,

We've been working hard to get to this stage. Just wanted to show you guys one I/O (8 channels in/8 out) card 99% assembled (just some minor components weren't there at the time of the photo)! ;)

So far everything is looking promising and working as designed.

We will be changing a few things on the next batch to correct some casual errors (you can see some wires there, result of swapped pin mistakes), but we might have a console connected really soon, with this beta 1 card! ;)

Cheers,

Artur

« Last Edit: September 05, 2015, 10:53:39 PM by Artur D'Assumpção »

Dan Korneff

  • Jr. Member
  • **
  • Posts: 76
  • Karma: +1/-0
Re: Project Status Update 9-08-2015
« Reply #6 on: September 10, 2015, 05:47:35 PM »
This is really impressive work! great job so far

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: Project Status Update 9-08-2015
« Reply #7 on: September 10, 2015, 06:29:18 PM »
BIG KUDOS to you guys!!!!!


Mattia.