Market Place > SSLMIXED products

SSL Ultimation Extender Set and Debug Cards

(1/3) > >>

Artur D'Assumpção:
Hi guys,

As you already know, back in 2015 out of necessity I designed a new SSL Ultimation Extender set with debugging purposes in mind. I had no other choice since the original extenders are nowadays impossible to source (and believe me I have looked all around! :o)! So, if you're an owner of a Ultimation console you know what I am talking about, Ultimation faders are close to impossible to maintain without a proper extender (e.g. calibrate/align or debug and fix faults). This new extender allows you to easily probe each one of the 48 signals that goes between the console and an Ultimation fader, helping you greatly to troubleshoot and service.

Each extender set includes:

* 1 x PCB Console Card(connects to the console in place of the Ultimation fader
* 1 x PCB Fader Card (connects to the fader giving you 48 test points fully documented onboard)
* 1 x 34way flat cable (2 meters)
* 1 x 16way flat cable (2 meters)

I am selling fully assembled sets. If you're interested contact me to my e-mail adassumpcao@gmail.com

CURRENT STATUS: IN STOCK


New videos showing how you can work with the extender:

https://www.youtube.com/watch?v=swClf9nT6Bw
https://www.youtube.com/watch?v=opZRgc40PbA
https://www.youtube.com/watch?v=c7LM8DHnTvE
https://www.youtube.com/watch?v=LdJJx55nS98

















PS: I am also working on a new prototype card  that will allow you to dial several test scenarios (fader connected, fader disconnected, fader load simulation, disable touch sense, etc.). This is a very small card I did to help me debug the faders, which is very small and connects between the fader package and the 353 card. If there's interest I can also factory produce this card and sell as a package with the extender card. Let me know what you think.

Cheers,

Artur

Artur D'Assumpção:
Hi guys,

After just too many requests for the past 2 years I am putting these back into production! I am doing a limited batch of units, so if you're interested just drop your name here and the quantity you're interested and I'll contact you as soon stock is ready (2 weeks estimated).

Keep you updated! :)

Cheers,

Artur

Matt Salazar:
I'm IN!

Artur D'Assumpção:

--- Quote from: Matt Salazar on November 16, 2017, 08:51:50 PM ---I'm IN!

--- End quote ---

Added! :)

waltzingbear:
any estimate on the cost??

who is assembling them?

Cheers
Alan

Navigation

[0] Message Index

[#] Next page