Recent Posts

Pages: [1] 2 3 ... 10
1
Technician Directory / Re: Looking for an SSL Tech in North West Washington St.
« Last post by jimlfixit on December 10, 2023, 06:21:44 PM »
Hi.
I am Jim Lassen, the wiring moderator on this forum. I worked at SSL from 1980-87, have installed and modified many SSL consoles since then and can help.
SSL remote patchbays were generally connected to the console with 96 way DL connectors which I have in stock and also sell Worldwide.
I have almost rebuilt SSL patchbays and know practically all the connections to the studio and console (channels and centre MRAC connectors etc) so, get in contact and I will see what I can do to assist you. Some details and pictures would be good in advance and maybe a chat on the phone later.
I can't fix things but I know the SSL wiring more than most people out there.
Based in Maidenhead, Bucks, UK
PS: I know Phil Nicolay as well so send him my regards if you contact him. Both overlapping at SSL in the early years!
2
Technician Directory / Re: Looking for an SSL Tech in North West Washington St.
« Last post by Clip6 on December 08, 2023, 12:03:59 AM »
phil nicolay seattle
3
Technician Directory / Looking for an SSL Tech in North West Washington St.
« Last post by reederje on December 07, 2023, 02:49:31 PM »
Hello All, Long time lurkers first time poster. I recently bought a beautiful SSL 4000G+, with a remote patch bay.  Unfortunately, the wiring between the console and the remote patch bay was damaged during shipping.  This has allowed us to rethink how we will wire each bucket to the patch bay, and I am currently rewiring the channels, which is fairly straightforward, but I need someone to help me sort out the center section and get the console up and running.  I would love to discuss the project more.  But since we sold our previous console, we have been without a mix room for a few months now, and we need to get back up and running.  Thanks so much for any suggestions.       
4
Sell-Buy / Regulator card for sale
« Last post by oyanliz on November 28, 2023, 02:29:39 PM »
Hi,

Regulator card for sale.

CF82E98

20 + shipping (obo)

Regards.

Oihan
5
Sell-Buy / Bar graph meter
« Last post by oyanliz on November 28, 2023, 02:27:03 PM »
Hi,

Bar graph meter for sale:

CF82E37

30 + shipping (obo)

Best regards.

Oihan
6
Sell-Buy / Processor card & sync display driver
« Last post by oyanliz on November 26, 2023, 07:03:29 AM »
Hi,

I have these cards for sell:

Sync. Display driver CF82E147
Z8 Processor card CZf82E131

30 euro + shipping (obo)

Best regards.

Oihan
7
4K,6K,8K Series / Re: New VU Led Design
« Last post by gollito on November 23, 2023, 06:28:45 AM »
Hi , sorry i was very busy lately in the studio and saw today your reply.
I found his details by a friend technician in Athens. As far as i know he dont have a website.
But i can send you his email and phone.

If he give me the permission to share his details in public i will post it here. :)

Ps: we already use his pcb-kit and our VUs on SSL looking amazing!
8
4K,6K,8K Series / Re: Stems
« Last post by Clip6 on November 12, 2023, 10:05:26 PM »
You've got 48 direct outs to make a simple stem pass, but the two mix feel will be an add on. Maybe someone will chime in.
9
4K,6K,8K Series / Re: Stems
« Last post by 79_Limited on November 12, 2023, 07:34:32 PM »
HaHa I don't want to do them either but artists will ask.  Fortunately, my new 4K will have the new Tangerine system so I can recall if bigger moves are needed.  However, even if no changes many will want copy of the stems for other uses.
10
4K,6K,8K Series / Re: Stems
« Last post by Clip6 on November 12, 2023, 06:41:20 PM »
Hey.

The more I think about it that's probably not the best way to do it but that's what forums are for.

Maybe someone will chime in that does it right. I don't do stems.

My clients don't pay me enough already so. Glad we started a thread on it.
Pages: [1] 2 3 ... 10