4k 611 module compressor LEDs lit all the time

[jwhmca]

I have swapped 82E10 cards and the card seems to not be causing the problem.

The ratio control lights up the LEDs even when the DYN switch is out. It seems to engage very quickly too... and go all the way red. Any thoughts?

[michaeldtech]

Check the module fuses?  Is the OL LED on as well?
Make sure all module voltages are proper.
Mike

[ULH]

Hi guys

First post here. Have been lurking a bit and very happy for this forum during our recent SSL hunt. We just acquired a SSL 4064G+ and one of the channels have the exact same fault as described above. jwhmca did you find a solution?

Cheers,
Uffe

[sintech]

Hi Uffe, does the fault follow the Dynamics card, or the 611 module?

[ULH]

We have just moved the console and are cleaning every inch of it so right now it's not connected up so I can't test this. I will try it out when it's all up and running :-)


Sent from my iPad using Tapatalk

[jwhmca]

Mine went away by itself from moving wires around!!! I think!?!

I hate those!!!

[ULH]

Thanks for the reply. I'll try the same tactics :-)