« previous next »
Pages: [1]

Author Topic: output switch help **SOLVED**  (Read 2616 times)

lukeaudio

  • Jr. Member
  • **
  • Posts: 65
  • Karma: +0/-0
output switch help **SOLVED**
« on: November 09, 2015, 01:24:09 AM »
Hi guys,

I need to know, where I can buy this switch (output switch ). See the picture ....
« Last Edit: January 20, 2017, 09:27:07 PM by Matt Sartori »
Logged

Artur D'Assumpção

  • Hero Member
  • *****
  • Posts: 661
  • Karma: +23/-0
  • Sintra, Portugal
Re: output switch help
« Reply #1 on: November 09, 2015, 02:10:28 PM »
Have you tried the usual suspects? Recycled Audio, Funky Junk?

Cheers,

Artur
Logged

lukeaudio

  • Jr. Member
  • **
  • Posts: 65
  • Karma: +0/-0
Re: output switch help
« Reply #2 on: November 09, 2015, 02:54:10 PM »
I'll try  ....
thank
Logged

Matt Sartori

  • Administrator
  • Hero Member
  • *****
  • Posts: 733
  • Karma: +21/-0
    • London
    • Solid State Logic Fanatics Database
Re: output switch help
« Reply #3 on: November 09, 2015, 04:10:55 PM »
Logged

lukeaudio

  • Jr. Member
  • **
  • Posts: 65
  • Karma: +0/-0
Re: output switch help
« Reply #4 on: November 10, 2015, 01:08:28 AM »
The ALPS switch is a little bit smaller than the other
Logged

jwhmca

  • Full Member
  • ***
  • Posts: 134
  • Karma: +4/-0
Re: output switch help
« Reply #5 on: November 11, 2015, 02:43:07 AM »
The switch used on the back of the AUX SEND controls
http://www.mouser.com/ProductDetail/CK-Components/F4UEE/?qs=sGAEpiMZZMvxtGF7dlGNpgCwsFGkmTT9zvqCi5GqOCM%3d

The switch used for like IN- PRE-SPLIT and PHASE "4-Pack"
http://www.mouser.com/ProductDetail/CK-Components/F6UEE/?qs=sGAEpiMZZMvxtGF7dlGNpkvuTQHbvtlSnge8p3X2G5o%3d

The switch used for the EQ and DYNamics "3-way"
http://www.mouser.com/ProductDetail/CK-Components/51902-F8UEE/?qs=sGAEpiMZZMvxtGF7dlGNpowNqRnK0sWOxGsEJnHC8X0%3d

Double Check and make sure I didn't get the numbers screwed up. :-)

If you ad a "TB" to a part number like F4UEETB, you will get a "seal" on the Top and Bottom. There are also ones with Gold plating.
Logged
"It's all about being a servant."

lukeaudio

  • Jr. Member
  • **
  • Posts: 65
  • Karma: +0/-0
Re: output switch help
« Reply #6 on: December 22, 2015, 10:12:48 PM »
many thanks
jwhmca
Logged

xmax

  • Sr. Member
  • ****
  • Posts: 284
  • Karma: +10/-3
Re: output switch help
« Reply #7 on: January 02, 2016, 11:19:52 PM »
jwhmca; I believe the eq and dynamics use the F6, I don't recall any of the switches being F8.
Logged

jwhmca

  • Full Member
  • ***
  • Posts: 134
  • Karma: +4/-0
Re: output switch help
« Reply #8 on: January 24, 2016, 05:13:40 AM »
Good catch,

Should be a F6UEE 3PDT
Logged
"It's all about being a servant."

MartyAckerman

  • Newbie
  • *
  • Posts: 35
  • Karma: +0/-0
Re: output switch help **SOLVED**
« Reply #9 on: January 31, 2023, 01:20:13 AM »
Hey all,

i know this is an old thread, but regarding the switch mentioned above:

Quote
The switch used on the back of the AUX SEND controls
http://www.mouser.com/ProductDetail/CK-Components/F4UEE/?qs=sGAEpiMZZMvxtGF7dlGNpgCwsFGkmTT9zvqCi5GqOCM%3d

This is the switch that engages the aux sends, correct? So it would be attached to bottom of the through-shaft pots for each of the aux sends on a 4k/6k? Can anyone confirm or deny if this is the best modern replacement?
Logged

Dave Dicson

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
Re: output switch help **SOLVED**
« Reply #10 on: January 31, 2023, 04:39:12 PM »
This is true. It is a DPDT alternate action push button switch.
Logged

MartyAckerman

  • Newbie
  • *
  • Posts: 35
  • Karma: +0/-0
Re: output switch help **SOLVED**
« Reply #11 on: January 31, 2023, 06:13:51 PM »
Thank you!
Logged
Pages: [1]
« previous next »