Recent Posts

Pages: [1] 2 3 ... 10
1
4K,6K,8K Series / Re: External monitoring not working
« Last post by oyanliz on Today at 02:56:47 PM »
Hi all,

After trying everything, I have decided to replace the card CF82E29 by a "new" one. Everything works fine now, the external sources sound a little bit low, but I think it is fine.

I still don't know what is wrong with the original card.

Best regards.

Oihan
2
4K,6K,8K Series / Re: Recapped Channel Not Getting to the Stereo Bus
« Last post by Matt Sartori on January 20, 2018, 07:17:31 PM »
We're definitely double & triple checking polarity as we go, so far so good. The channels are having different problems, there's about 6 channels not getting to the Stereo Bus. About 3 are getting to the Insert Send, non to the Group Output or its own Group. We're going through the channels and trying out new VCA & Group Amp cards.

Appreciate the help!

Definitely try and swap cards to find out where the problem is, then narrow in with a scope

Matt
3
4K,6K,8K Series / Re: Post fader metering and bus comp question
« Last post by Showcase on January 20, 2018, 04:49:30 PM »
Question 1 i have an old E and i have to use ready group.direct like you

Question 2 No you cant, not without including MF vca controller
4
4K,6K,8K Series / Post fader metering and bus comp question
« Last post by Immortal Sound on January 20, 2018, 06:58:25 AM »
Hey guys quick question anyone utilizing post fader metering? This way your seeing the output after eq and fader riding on individual channels?

I canít seem to do it on my g+ Se
I can do it when not using small fader Ie: using the ready group and direct buttons but once Iím using small fader for parelell compression it removes it from the bus. So Iím stuck. I kind of remember on the old e this didnít happen. But it was so long ago I donít remember.
Faders into meters just place fader position??

Question 2

Anyway to patch the quad comp into say channel 5 and 6 but leave the master fader post 2 bus insert and functional??


Thanks guys in advance.
5
4K,6K,8K Series / Re: Recapped Channel Not Getting to the Stereo Bus
« Last post by sintech on January 19, 2018, 09:26:38 AM »
I'd probably scope backwards from the large Fader buffer (located on the Mic/Line Card)
6
4K,6K,8K Series / Recapped Channel Not Getting to the Stereo Bus
« Last post by Josh Moran on January 19, 2018, 07:50:16 AM »
We're definitely double & triple checking polarity as we go, so far so good. The channels are having different problems, there's about 6 channels not getting to the Stereo Bus. About 3 are getting to the Insert Send, non to the Group Output or its own Group. We're going through the channels and trying out new VCA & Group Amp cards.

Appreciate the help!
7
4K,6K,8K Series / 4K Test/Repair Jig
« Last post by Loopzilla5 on January 18, 2018, 03:01:07 PM »
Hi Everyone,

I am looking to build or buy a 4K Test/Repair jig for my bench.

Does anyone have info?

Thanks!

Chris
8
Sell-Buy / Re: Parting out 4000E centre section
« Last post by Subhumanrecords on January 18, 2018, 03:47:55 AM »
651 without cards?


Sent from my iPhone using Tapatalk
9
4K,6K,8K Series / Re: Distortion and Pumping Level/Meters On Stereo Bus
« Last post by Matt Salazar on January 17, 2018, 09:44:23 PM »
Would that be on the 82E27 card?
10
4K,6K,8K Series / Re: Distortion and Pumping Level/Meters On Stereo Bus
« Last post by waltzingbear on January 17, 2018, 06:24:52 PM »
solder bridge, cold solder joint on some control voltage that affects that VCA

close inspection time.

Cheers
Alan
Pages: [1] 2 3 ... 10