Recent Posts

81

4K,6K,8K Series / Re: Phantom Power buzz noise

« Last post by tlmaen on February 15, 2024, 11:39:14 AM »

I had it under the first ten Channelsafter the Center section to the right side.
So it was roughly a meter away from the CS Cables.

Maybe that was the Problem.

Anyways, it really works to have the PSU in the Control room, barely noticeable...

Best,
Tilmann

82

4K,6K,8K Series / Re: A new flavour for the 4K preamp! 2022

« Last post by MarconeMusic on February 14, 2024, 01:51:17 AM »

I’ll see what I can do for the audio samples. I’ve cleared the drive. Unsure if I kept those samples.  But can make more soon. We’re gonna do a bunch of audio and video to update the website.

83

4K,6K,8K Series / Re: Phantom Power buzz noise

« Last post by horizonsound on February 13, 2024, 08:44:19 PM »

Where did you have the power supply before, in relation to the the console?

I have had noise induced on the console when a power supply was positioned directly under the centre section, where the cross cabling is located.

Anthony.

84

4K,6K,8K Series / Re: Phantom Power buzz noise SOLVED

« Last post by tlmaen on February 13, 2024, 12:31:24 PM »

Hi,
solved the Problem.
I used DeoxitD5 on all ends of the Power Cable, and at the Connector at the console.
At the same time I moved the PSU away from the Console, so it sits in the Rack in the Front Wall.
I really can't tell what fixed it, but the noise is completely gone...

Thanks,
Tilmann

85

4K,6K,8K Series / Re: Plasma Meter Trouble

« Last post by Loopzilla5 on February 11, 2024, 09:00:58 PM »

Not yet - haven't taken much time to look at it in the last few weeks, but our problem sounds similar...

86

Sell-Buy / Re: Bar graph meter

« Last post by oyanliz on February 11, 2024, 11:41:04 AM »

Hi,

I have found 2 more bargraphs stored.

Regards.

Oihan

87

4K,6K,8K Series / Re: Plasma Meter Trouble

« Last post by cleartrack on February 11, 2024, 03:51:32 AM »

Any luck?

I had the exact same thing happen (power related damage to one of the main plasma boards). I've tried replacements, myself and a few techs were unable to resolve it. Partially rebuilt all 3 of the E73, E74, E75 cards with all new components. The op-amp replacements may be a problem in my system (HA2-2645-5), though I've tried new ones.

88

4K,6K,8K Series / Re: Are DL /ELCO blocks the same for neve and SSL?

« Last post by walrus on February 10, 2024, 11:44:52 PM »

All the Neves I’ve had dealings with used Edacs (Elco?) which are a totally different connector to a DL.

89

4K,6K,8K Series / Re: Are DL /ELCO blocks the same for neve and SSL?

« Last post by Clip6 on February 10, 2024, 08:26:26 PM »

Worst case just need to repin order. Easy.

90

4K,6K,8K Series / Re: Adding Ultimation faders from different desks

« Last post by seedubs on February 10, 2024, 06:40:51 PM »

  All parts are interchangeable for anyone who cares. Works perfectly.