« previous next »
Pages: 1 ... 3 4 [5] 6

Author Topic: Building my mini SSL4k  (Read 25597 times)

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #60 on: February 06, 2014, 02:43:52 AM »
Can anyone tell me if this metal will work for my DIY center section? It would be to make the 651 top panel aka.. for the pots, switches?

http://m.ebay.com/itm/360693342322?nav=SEARCH&sbk=1
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)

walrus

  • Full Member
  • ***
  • Posts: 138
  • Karma: +13/-0
    • London, UK.
Re: Building my mini SSL4k
« Reply #61 on: February 06, 2014, 02:55:34 PM »
That's only 1.27mm thick, I would think it is too thin and would be difficult to work with without getting small kinks in it.
Logged
Kevin.

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #62 on: February 06, 2014, 02:59:11 PM »
I found some thicker, I think they have 3/16th, 3/8 in. What would be a good thickness. Thanks walrus.

Myke


Recording 2 inches @ a Time(plus PT)
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)

walrus

  • Full Member
  • ***
  • Posts: 138
  • Karma: +13/-0
    • London, UK.
Re: Building my mini SSL4k
« Reply #63 on: February 07, 2014, 10:51:20 AM »
3/16th is about 4.7mm and maybe a bit too thick, making it hard to work with. 3/8th if *far* to thick! ;D
Best size is 1/8th if you can find it.
Logged
Kevin.

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #64 on: February 07, 2014, 05:53:05 PM »
 Thanks.


Recording 2 inches @ a Time(plus PT)
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #65 on: February 16, 2014, 04:03:24 PM »
Ok, since I haven't found a 25 card yet, I got 9k balancing pcbs.
Andy, these look like they have jumpers on a few places and why was that done? I need to takes these out I'm a guessing. Do you no what the IC chips that go in here?
Also, I found some 1/8in 6061 T6 aluminum metal to start the 651 section. Will a 12"in X 24" piece of metal work to fab it up. Any suggestions would be great people.
Thanks all.
Myke
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Building my mini SSL4k
« Reply #66 on: February 16, 2014, 04:54:04 PM »
Yeah, they look like they may have been used for a different purpose. You want to remove the jumpers and stuff them as they were intended.

The IC package is expensive, but it has a complete cross coupled output stage in one IC :-)
Logged

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #67 on: February 16, 2014, 06:26:58 PM »
Thanks andy, do you no what IC they take? Don't have BOM and can't find it at the other forum


Recording 2 inches @ a Time(plus PT)
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Building my mini SSL4k
« Reply #68 on: February 16, 2014, 06:27:58 PM »
Let me search the hard drives :)
Logged

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Building my mini SSL4k
« Reply #69 on: February 16, 2014, 06:33:04 PM »
Attached.. page 7
Logged

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #70 on: February 16, 2014, 06:33:26 PM »
Cool, Jim just posted some blank panel, couldn't I use the panels to make my 651 section?


Recording 2 inches @ a Time(plus PT)
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Building my mini SSL4k
« Reply #71 on: February 16, 2014, 06:41:45 PM »
Yeah, that's totally the way to go
Logged

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #72 on: February 16, 2014, 06:43:27 PM »
Cool.


Recording 2 inches @ a Time(plus PT)
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Building my mini SSL4k
« Reply #73 on: February 16, 2014, 06:54:01 PM »
This is one of the G series panels, supplied by Jim. Got some E series ones also, as at that point the colour scheme was unknown for my Centre build

Logged

Subhumanrecords

  • Full Member
  • ***
  • Posts: 140
  • Karma: +11/-2
  • Keeping Analog Alive 2 Inches @ A Time !!
    • Nashville, TN USA
    • Subhumanaudiopro
Re: Building my mini SSL4k
« Reply #74 on: February 16, 2014, 06:57:12 PM »
Nice, is that a buss comp meter? Got to. Get me one of those also.lol


Recording 2 inches @ a Time(plus PT)
Logged
Keeping Analog Alive 2 Inches @ A Time !!(Plus PTHD)
Pages: 1 ... 3 4 [5] 6
« previous next »