SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: oyanliz on September 13, 2017, 03:09:08 PM

Title: CF82E21 Gentech reed relays replacement (SOLVED)
Post by: oyanliz on September 13, 2017, 03:09:08 PM
Hi all,

Does someone know which component could be used for replacing an old Gentech reed relays?

Thanks in advance.
Title: Re: CF82E21 Gentech reed relays replacement
Post by: oyanliz on September 15, 2017, 06:53:07 AM
Hi all,

I have ordered these reed relays and gonna test them next week:

RL1-> http://www.tme.eu/es/details/he721c0510/reles-electromagn-de-lengueta/littelfuse/

RL2-> http://www.tme.eu/es/details/he721a0510/reles-electromagn-de-lengueta/littelfuse/
                                                            or

          http://www.tme.eu/es/details/he721a0500/reles-electromagn-de-lengueta/littelfuse/

In the schematics the RL2 relay is drawed as non-diode relay, but our card has a GT831C-2 relay and this model is Diode included relay (I have attached the data sheet pdf of these relays). I bought both, just in case, but will try with the HE721A0510 on the RL2, just in case.

If someone can confirm that the schematics are not well defined regarding to the RL2, it would be good information!!

I will write back the next week.

Regards.
Title: Re: CF82E21 Gentech reed relays replacement (SOLVED)
Post by: oyanliz on September 19, 2017, 08:06:59 AM
Hi,

I have installed the relays and they work fine.

So I share this info just in case:

CF82E21 Master status card:

RL1
GENTECH GT831C-2 -> HAMLIN HE721C0510
http://www.tme.eu/es/details/he721c0510/reles-electromagn-de-lengueta/littelfuse/

RL2
GENTECH GT831A-4 -> HAMLIN HE721A0510
http://www.tme.eu/es/details/he721a0510/reles-electromagn-de-lengueta/littelfuse/

Regards
Title: Re: CF82E21 Gentech reed relays replacement (SOLVED)
Post by: Clip6 on September 20, 2017, 02:44:06 AM
 8)