« previous next »
Pages: [1]

Author Topic: Solo issue...  (Read 647 times)

Franz

  • Jr. Member
  • **
  • Posts: 58
  • Karma: +0/-0
Solo issue...
« on: June 06, 2023, 10:11:24 PM »
Hi guys, for a while now when I go to SOLO on any channel, the other channels don't mutate. It only happens on VCAs--can anyone explain why? Attached is the video.

Thanks!
Logged

Dave Dicson

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
Re: Solo issue...
« Reply #1 on: June 07, 2023, 08:15:11 PM »
Sounds like an issues on the "20" card at the bottom the 651 Master module. There 4 Ribbon cables plugged into it. I have had a lot of issues with this card over the years. Make sure there is nothing burnt.
Logged

horizonsound

  • Sr. Member
  • ****
  • Posts: 344
  • Karma: +21/-0
    • Melbourne, Australia
    • Horizon Sound
Re: Solo issue...
« Reply #2 on: June 07, 2023, 10:23:19 PM »
I would agree with Dave here. The 82E20 VCA card caused me so much grief, that it was the first card I cloned.
Seems SSL had similar issues, as there ended up being many (14?) revisions of the card with significant differences between each.
I've saved a few frustrated owners this year by replacing that card with a new one.

Anthony.
Logged

Franz

  • Jr. Member
  • **
  • Posts: 58
  • Karma: +0/-0
Re: Solo issue...
« Reply #3 on: June 08, 2023, 01:10:49 AM »
Thank you guys, will check! Anthony, if the problem is unsolvable I think you'll have to save me too! :)
Logged

horizonsound

  • Sr. Member
  • ****
  • Posts: 344
  • Karma: +21/-0
    • Melbourne, Australia
    • Horizon Sound
Re: Solo issue...
« Reply #4 on: June 08, 2023, 06:22:16 AM »
No problem Franz. Reach out if you need anything.

Anthony
Logged
Pages: [1]
« previous next »