Hi Christian, the line up for the 14 card is going to be pretty much the same for the 13 card, really only the VCA type differed.
As a ballpark, you can flip your VU's into 'VCA to Meters' with all your faders sat on 0dB, and get an idea if anythings wildly off.
VCA Card 82E13 (Non-Ultimation only)
Set the console to Record status and press the channel FLIP and DIRECT buttons. With +14dB applied to the Line Input, measure at the Group Output and adjust VR3 for +14dB output with the large (VCA) fader set at 0dB. Measure this output again for fader settings of +10, -10, and -20dB. Adjust VR2 (dB/V adjustment) to correct or evenly distribute any measured error.
Set the fader to 0dB and, using a distortion meter, adjust the Symmetry present VR1 for minimum distortion.