SSlmixed.com Forum
Tech discussion => 4K,6K,8K Series => Topic started by: mg73 on August 23, 2018, 08:57:02 PM
-
If I for example assign ch1-8 to group 1 and solo that group
only ch3-8 goes into solo not ch 1,2.
But solo works fine direct on ch1,2
all other channels work as they should it's just ch 1-2.
Is this a software problem(or just an selectable option)
or is it a fault on the channelstrip?
It's a 4056G+ SE