SSlmixed.com Forum
Market Place => Sell-Buy => Topic started by: marcmozart on July 18, 2013, 02:48:28 PM
-
Hey guys,
I bought some spares from elshiftos, found the things I was after and there's still A LOT left - so here's what I have available.
Ideally I'd like to trade against other spares, so if you're interested in any of this, let me know what you have for trade.
- 26 green knob caps as used on Dynamics and EQ (just the colored caps) - note this is the darker green used on the E-Series NOS (new!!)
- Engraved White Switch Caps, engraved as follows... (they are all very clean, many are or at least look like NOS, the rest I have cleaned in my Miele Dishwasher)
They are from the E-Series years, as the font used for engraving is slightly smaller than whats been used on my 1991 G-Series.
SOLO (24x)
CUT (1x) engraved in red type)
READY GROUP (12x) engraved in orange type
READY TAPE (6x) engraved in green type
STEREO 1 (2x)
STEREO 2 (4x)
STEREO 3 (4x)
STEREO 4 (5x)
STEREO 5 (4x)
DISC (6x)
QUAD TAPE 1 (1x)
QUAD TAPE 2 (1x)
AFL (2x)
CUES CUT (2x) engraved type is red
MASTER READY GROUP (1x) engraved type is orange
VCA TO METERS (1x)
REC (1x)
ANALOG A (5x)
ANALOG B (2x)
ANALOG C (3x)
STUDIO (1x)
ATR (4x)
TV (1x)
CUE (3x)
VSP (2x)
AIR MONITOR (1x)
B62 (2x)
COPY ROOM (3x)
VCA TO MON ISOLOATE (1x)
SOLO ISOLATE 25-32 (1x)
VARI SPEED (3x)
PCM (1x)
PCM 701 (2x)
CASS (1x)
CASSETTE 1 (2x)
CASS 2 (1x)
CASSETTE 2 (1x)
VIDEO (3x)
M.D. (2x)
A80 1/2 (2x)
A80 1/4 (2x)
QUAD DISC (1x)
VTR 1 (1x)
DAT (1x)
SEARCH (6x)
- Track Arm Switch Caps (this is the big switch underneath the READY GROUP / READY TAPE buttons, usually in red)
on these, the white font engraved is bigger than on my G-Series, so again, assuming this is from the E-Series days.
Track Arm Switch Cap, red, not engraved (23x)
Track Arm Switch Cap, white, not engraved (10x)
Track Arm Switch Cap, red, Engraved as follows:
1 (2x)
4 (1x)
5 (1x)
7 (1x)
7/31 (1x)
9 (1x)
18/42 (1x)
19/43 (1x)
20/44 (1x)
22/46 (1x)
23/47 (1x)
24/48 (1x)
25 (2x)
26 (2x)
29 (2x)
30 (2x)
31 (2x)
32 (1x)
33 (2x)
34 (3x)
35 (3x)
36 (3x)
37 (3x)
38 (3x)
39 (2x)
41 (3x)
42 (2x)
43 (2x)
44 (1x)
45 (1x)
47 (2x)
48 (1x)
-
Hey Marc do you heavy any off these left?
SOLO (8)
CUT (1x) engraved in red type)
READY GROUP (12x) engraved in orange type
READY TAPE (6x) engraved in green type
AFL (2x)
CUES CUT (2x) engraved type is red
MASTER READY GROUP (1x) engraved type is orange
VCA TO METERS (1x)
REC (1x)
CUE (3x)
VCA TO MON ISOLOATE (1x)
SOLO ISOLATE 25-32 (
- Track Arm Switch Caps (this is the big switch underneath the READY GROUP / READY TAPE buttons, usually in red)
no these, the white font engraved is bigger than on my G-Series, so again, assuming this is from the E-Series days.
Track Arm Switch Cap, red, not engraved (16)
Track Arm Switch Cap, white, not engraved (10x)
Track Arm Switch Cap, red, Engraved as follows:
1 (2x)
4 (1x)
5 (1x)
7 (1x)
7/31 (1x)
9 (1x)
18/42 (1x)
19/43 (1x)
20/44 (1x)
22/46 (1x)
23/47 (1x)
24/48 (1x)
Recording 2 inches @ a Time(plus PT)
-
Yes should still have most of these. Will have a look when I get to the studio tomorrow.
Hey Marc do you heavy any off these left?
-
Cool bro, let me no whenever. No rush. Just trying to get parts together cause Andy has me itching to get my centre section going. Needing the 026 cards and its on like donkey kong..
Thanks dude.
Myke
Recording 2 inches @ a Time(plus PT)
-
Do you have anything for trade that you don't need for your own console? (As I prefer a trade to asking a bro for money.)
Cool bro, let me no whenever. No rush. Just trying to get parts together cause Andy has me itching to get my centre section going. Needing the 026 cards and its on like donkey kong..
Thanks dude.
Myke
Recording 2 inches @ a Time(plus PT)
-
All I have to trade on is the cards I posted in the MKT. I'm buying odds and ends as I go or can afford right now, your more than welcome with anything I got. I paid another member a shitload for things I needed and didn't get shit that I needed. Lol..
Myke
Recording 2 inches @ a Time(plus PT)
-
If the Oscillator-Card is still available, that would be a perfect trade as mine acts a bit funny.
All I have to trade on is the cards I posted in the MKT. I'm buying odds and ends as I go or can afford right now, your more than welcome with anything I got. I paid another member a shitload for things I needed and didn't get shit that I needed. Lol..
Myke
Recording 2 inches @ a Time(plus PT)
-
Hey Marc, sorry it's been a minute. I can do some trading on the Osc card if you want.
Myke
-
Hi Marc,
I'm looking for :
2X "Stereo 1"
1X "Studio"
1X "IN" for quad comp
Thanks in advance
Roy
-
Hi Roy,
let me check - I still have a lot of those. Will get back to you!
Hi Marc,
I'm looking for :
2X "Stereo 1"
1X "Studio"
1X "IN" for quad comp
Thanks in advance
Roy
-
Also looking for :
"External to studio"
"Ext T/B"
"Solo 0"
Thanks!
Roy