SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: xmax on April 23, 2015, 04:12:12 PM

Title: 6K modules in 4K desk?
Post by: xmax on April 23, 2015, 04:12:12 PM

So obviously you won't have a C buss, but other than that will they work?
Also if the 6K module is a E and desk or center section is G?

Title: Re: 6K modules in 4K desk?
Post by: sintech on April 24, 2015, 12:51:10 AM

Really A bus is LF,RF, and B is LB, RB, so C won't work.. but you could add an API mix bus to C...

When mixing channels, you only have to set the jumper (the coat hanger bypass) to either unbalanced or quasi-balanced

So essentially everything is the lineage :)

Title: Re: 6K modules in 4K desk?
Post by: xmax on April 24, 2015, 06:06:42 PM

I am still a little unclear on the jumper/coat hanger mod. So you just have to mod
the channel and do what to it? Thanks!!!!!!! N

Title: Re: 6K modules in 4K desk?
Post by: sintech on April 24, 2015, 07:42:44 PM

Quote from: xmax on April 24, 2015, 06:06:42 PM

I am still a little unclear on the jumper/coat hanger mod. So you just have to mod
the channel and do what to it? Thanks!!!!!!! N

Most are done.. so it's just a matter of setting the jumper, to Coat hanger or shorted positions

Title: Re: 6K modules in 4K desk?
Post by: xmax on April 25, 2015, 03:59:04 PM

Where is the jumper? Thanks! N

Title: Re: 6K modules in 4K desk?
Post by: sintech on April 25, 2015, 04:45:27 PM

Blue Jumper:

(http://i44.photobucket.com/albums/f23/sin-tech/IMG_7407_zpsytzi09xd.jpg) (http://s44.photobucket.com/user/sin-tech/media/IMG_7407_zpsytzi09xd.jpg.html)

Title: Re: 6K modules in 4K desk?
Post by: xmax on May 12, 2015, 03:49:14 AM

So I take it thats how they should be set for G quasi balanced? THANKS. N

Title: Re: 6K modules in 4K desk?
Post by: sintech on May 12, 2015, 08:53:39 AM

Quote from: xmax on May 12, 2015, 03:49:14 AM

So I take it thats how they should be set for G quasi balanced? THANKS. N

That setting is coat hanger  shorted, in this case, a G in an E frame.