6K modules in 4K desk?

[xmax]

So obviously you won't have a C buss, but other than that will they work?
Also if the 6K module is a E and desk or center section is G?

[sintech]

Really A bus is LF,RF, and B is LB, RB, so C won't work.. but you could add an API mix bus to C...

When mixing channels, you only have to set the jumper (the coat hanger bypass) to either unbalanced or quasi-balanced

So essentially everything is the lineage

[xmax]

I am still a little unclear on the jumper/coat hanger mod. So you just have to mod
the channel and do what to it? Thanks!!!!!!! N

[sintech]

I am still a little unclear on the jumper/coat hanger mod. So you just have to mod
the channel and do what to it? Thanks!!!!!!! N

Most are done.. so it's just a matter of setting the jumper, to Coat hanger or shorted positions

[xmax]

Where is the jumper? Thanks! N

[sintech]

Blue Jumper:

[xmax]

So I take it thats how they should be set for G quasi balanced? THANKS. N

[sintech]

So I take it thats how they should be set for G quasi balanced? THANKS. N

That setting is coat hanger  shorted, in this case, a G in an E frame.