Author Topic: 4000G+ cut switch illumination issue  (Read 1661 times)

Original_Box

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
4000G+ cut switch illumination issue
« on: September 26, 2023, 08:19:58 PM »
Hello All!

Hoping someone has some insight into this as I don't, but believe there is a global issue that I am missing. Below is what I can deduce:

Console: 4048G+ VU's with Atomic PS and Tangerine TAI automation

Issue: Engaging the channel cut switches cut the audio, but the switches do not illuminate.

Some notes on overall behavior.
   Soloing any channel, the cuts illuminate as normal
   The center section cuts illuminate normally
   Installing the computer bypass yields normal operation
   

Thank you all for any wisdom

Aaron



Alex J Kramer

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • Kyiv, Ukraine
    • Duma Studios
Re: 4000G+ cut switch illumination issue
« Reply #1 on: December 01, 2024, 06:36:03 PM »
Same s**t, unfortunately :(
Can anyone help us?
1985 SSL 6072 E/G+
THD Labs Tangerine
Atomic Instrument PSU S2(with plasma)

Pinebox

  • Newbie
  • *
  • Posts: 23
  • Karma: +0/-0
Re: 4000G+ cut switch illumination issue
« Reply #2 on: December 02, 2024, 03:38:02 PM »
Check the fets on the VCA cards.