Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 10
41
4K,6K,8K Series / Re: Adding aux
« Last post by horizonsound on March 16, 2024, 10:58:07 PM »
Would adding a split cues system work for you?

This puts 1-4 aux sends on the left of the console, and makes the right of the console 5-8.

Alternatively, I have a cues matrix system here which adds up to 8 additional cue sends, for a total of 12 cue sends. It was from a live TV studio, on a 6088G console.

It requires considerable modification to each channel, and the back planes.



Anthony.
42
Sell-Buy / FOR SALE: x2 Solid State Logic Stabilized Power Supply and Changeover Unit set
« Last post by Alex J Kramer on March 16, 2024, 11:07:46 AM »
Recently removed from the studio. Everything is in perfect working order, was fully checked and tested by Bruce Millett of Desk Doctor.
Please feel free to ask any questions!

Will ship to continental US.

Local pick up in Las Vegas is available. Pick up in Los Angeles can be arranged. Thanks for your interest!

https://reverb.com/item/17680972-x2-solid-state-logic-stabilized-power-supply-and-changeover-unit-set

OR

https://www.ebay.com/itm/263833065713

43
4K,6K,8K Series / Re: Adding aux
« Last post by Richealey on March 15, 2024, 04:14:43 PM »
On the early E series at Le Studio I modded the rear buss to be an extra send. I turned the front / rear pan into gain control for rear only.  I bypassed the L / R pan pot for the rears. I pulled the rear VCA cards in the center section and you could use the pre VCA sends as your outputs.
Paul Northfield can up with the idea. He was always coming up with cool ideas.
44
4K,6K,8K Series / Re: Adding aux
« Last post by Clip6 on March 15, 2024, 02:33:14 AM »
Also you could do bluestone/ air cues mod. You get send off front rear buss assign. You also could do what Shelly Yakus does and mod the buss pan and make that an efx send. Lots of work on those two choices. You could only modify a few channels like tla did. He has a few just for extra send for say vocal.
45
4K,6K,8K Series / Re: Adding aux
« Last post by Clip6 on March 15, 2024, 02:28:19 AM »
When you select say bus 1-4 at the same time the direct level on each buss will control master level for each buss. If you return buss to console the main fader now becomes efx level control also.
46
4K,6K,8K Series / Re: Adding aux
« Last post by Riff Raff on March 14, 2024, 07:14:53 PM »
Thanks, I will check MWTM's videos.
I already use the small faders with the output buton to feed a buss for parrallel compression.
But for me, it just gives one more stereo aux related to a subgroup. Is there a way to add more than one aux that can be a different mix for each ? Just like having more aux pots like the 5 "real" aux on the console for feeding more headphone amps while recording and more FX while mixing ?
Sorry If my questions are stupids, I'm not english fluent, I got the manual but I don't see a way to add several different mixes.
47
4K,6K,8K Series / Re: Adding aux
« Last post by Clip6 on March 14, 2024, 06:13:38 PM »
You have manual?

Press output above small fader then select buss now you have extra effect send?

Subscribe to mix with the masters and watch cla videos.

That will help.

48
4K,6K,8K Series / Re: Adding aux
« Last post by Riff Raff on March 14, 2024, 01:12:02 PM »
Thanks for your answer.
No, I don't get how to use routing section as auxes.
Can you explain please ?
Thanks.
49
4K,6K,8K Series / Re: Adding aux
« Last post by radardoug2 on March 13, 2024, 08:10:19 PM »
You do know you can use the routing section as extra auxes?
50
4K,6K,8K Series / Adding aux
« Last post by Riff Raff on March 13, 2024, 11:29:06 AM »
Hi, I think about adding more aux to my console (4000E).
I'm pretty sure some of you already done that.
My question is: where is the best place to take the signal on each channel ? (pre and post).
Thanks a lot.
Pages: 1 ... 3 4 [5] 6 7 ... 10