Author Topic: Misc parts needed to complete project console.  (Read 1926 times)

Kprellz

  • Newbie
  • *
  • Posts: 38
  • Karma: +1/-0
Misc parts needed to complete project console.
« on: May 13, 2021, 08:14:13 PM »
Hey y’all, starting the insane adventure of owning an SSL today. It’s quite a project so I figured I’d leave this open so I can just add things as I discover that I need them haha.
To kick it off I need to legs for the SSL stand. I have the long cross beams just need the legs,
Also need 48 channels of VU meters with the paneling. Will take whatever y’all got. Doesn’t need to be the whole kit.

simonstav

  • Newbie
  • *
  • Posts: 33
  • Karma: +0/-0
    • Melbourne Australia
    • Simon Stavenuiter Audio Production
Re: Misc parts needed to complete project console.
« Reply #1 on: May 13, 2021, 11:44:36 PM »
Yep got plenty of meters with bezels and panels. I will do a count and let you know how many I have.

jimlfixit

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 356
  • Karma: +44/-0
    • Maidenhead, Bucks, UK
Legs for SSL console
« Reply #2 on: May 14, 2021, 02:06:38 AM »
Hi Kprellz
Regarding legs for SSL consoles, I think Gareth Conner on here may have some of these but he is in the UK so I am not sure how practical and financially viable this would be to send them to the USA. Check him out and good luck.

Kprellz

  • Newbie
  • *
  • Posts: 38
  • Karma: +1/-0
Re: Misc parts needed to complete project console.
« Reply #3 on: May 14, 2021, 06:27:28 AM »
Roy Hendrickson said he had a pair so I’m gonna pick those up! So that’s the first item off the list!

Kprellz

  • Newbie
  • *
  • Posts: 38
  • Karma: +1/-0
Re: Misc parts needed to complete project console.
« Reply #4 on: May 30, 2021, 06:14:37 PM »
Anyone got an ssl power chord? Or even a link in where to get new parts to make one

horizonsound

  • Sr. Member
  • ****
  • Posts: 343
  • Karma: +21/-0
    • Melbourne, Australia
    • Horizon Sound
Re: Misc parts needed to complete project console.
« Reply #5 on: May 30, 2021, 09:41:54 PM »
Hey Kevin

Part numbers below are for Element 14 / Farnell

I used 8 way van damme speaker cable. You will likely need more cores as you are running a higher channel count.

19 Way ITT Trident Ringlock Series Plug Male Pin   192922-1280   ITT Cannon
19 Way ITT Trident Ringlock Series Plug Female Socket   192926-0530   ITT Cannon
Circular Connector Contact, T2P, Stamped, Trident Series, Pin, Crimp, 14 AWG, 16 AWG   192990-1220   ITT Cannon
Circular Connector Contact, T2P, Stamped, Trident Series, Socket, Crimp, 14 AWG, 16 AWG   192990-1230   ITT Cannon
Circular Connector Clamp, Straight, Unsealed, 16, 17 mm, Nylon (Polyamide), Trident Ringlock Series   TR16ASR1N   ITT Cannon

waltzingbear

  • Sr. Member
  • ****
  • Posts: 329
  • Karma: +13/-0
    • Portland, Oregon
    • Waltzing Bear Audio
Re: Misc parts needed to complete project console.
« Reply #6 on: May 31, 2021, 06:40:54 AM »
 Element 14 / Farnell known in the US as Newark Electronics.
https://www.newark.com


Cheers
Alan
Alan Garren
Waltzing Bear Audio

Kprellz

  • Newbie
  • *
  • Posts: 38
  • Karma: +1/-0
Re: Misc parts needed to complete project console.
« Reply #7 on: June 03, 2021, 03:22:43 AM »
Thanks so much guys!!!! Don’t suppose anyone also has a whole bunch of MRAC pins they would sell me. eBay hasn’t been much luck and can’t find a place that has stock for a reasonable price. Need to redo both mracs. Got the housing from Winchester interconnec 104H