Author Topic: Master imbalance SSL 4000E """>>>SOLVED<<<"""  (Read 5868 times)

oyanliz

  • Full Member
  • ***
  • Posts: 197
  • Karma: +1/-0
Re: Master imbalance SSL 4000E """>>>SOLVED<<<"""
« Reply #15 on: June 21, 2017, 07:25:53 AM »
Thanks to all who has respond to my posts!!

All the capacitors of both 82E26 cards were replaced a few months ago except C18 and C9 (on both).

Finally I decided to replace  the C18 capacitor by a " WIMA  MKS2B046801M00JSSD  6.8 µF, 50 V, PET, ± 5%, Serie MKS2", following the recomendations of "marcmozart" on one of his post:
http://forum.sslmixed.com/index.php/topic,308.0.html

C9 capacitor were replaced by these two capacitors:
"PANASONIC ELECTRONIC COMPONENTS  EEUFM1E101   100 µF, 25 V, Serie FM, ± 20%"
" WIMA  MKP2F031001F00KSSD  0.1 µF, 250 V, PP, ± 10%, Serie MKP2"

This replacement is following the recomendation of "Jim Williams" on:
https://www.gearslutz.com/board/high-end/117824-ssl-4000-e-g-modifications.html

And reposted on this forum by "marcmozart":
http://forum.sslmixed.com/index.php?topic=261.0

My console is completely balanced, see atached photos.

If someone need more photos or details, please do not hesitate contacting with me.

Thanks to all again

Regards.

Oihan

oyanliz

  • Full Member
  • ***
  • Posts: 197
  • Karma: +1/-0
Re: Master imbalance SSL 4000E """>>>SOLVED<<<"""
« Reply #16 on: June 21, 2017, 09:15:47 AM »
Hi all again,

I have the last question regarding to the R23 resistor type. I replaced this resistor (because a technician cut them) with ones bought in the nearest supplier from my area. I think they are 10ohm 1W, but the original one it was smaller (1/4w, 1/2w or so...)

Could someone tell me which kind of resistor would be the best option for replacing in R23 of 82E26 card?

Thanks to all again.

Regards.

Oihan

waltzingbear

  • Sr. Member
  • ****
  • Posts: 329
  • Karma: +13/-0
    • Portland, Oregon
    • Waltzing Bear Audio
Re: Master imbalance SSL 4000E """>>>SOLVED<<<"""
« Reply #17 on: June 22, 2017, 01:29:24 AM »
hooray its working now! Now leave it alone and make music!

those are fine, it won't matter in the scheme of things what you put there. (I know, I know, some won't agree, what would be best of course is to replace with the Holco resistors that were taken out, but they aren't made anymore, so I rest my case.... Make Music )

Cheers
Alan

Alan Garren
Waltzing Bear Audio

Franz

  • Jr. Member
  • **
  • Posts: 58
  • Karma: +0/-0
Re: Master imbalance SSL 4000E """>>>SOLVED<<<"""
« Reply #18 on: May 27, 2021, 07:16:36 PM »
Hi Oyanliz! Did you do it this way? C9 is a Panasonic 100uf 35V instead of 10uf 35V with Wima MKP2 0.01uf 250V on C9 and C8 (Nichicon Muse Non Polar Cap 100uf 25V)

oyanliz

  • Full Member
  • ***
  • Posts: 197
  • Karma: +1/-0
Re: Master imbalance SSL 4000E """>>>SOLVED<<<"""
« Reply #19 on: May 28, 2021, 06:51:32 AM »
Here are the lost photos.

Regards.

Oihan