Jumpers for computer >>> SOLVED <<<

[christiancarvin]

Hello every one!

I had a problem with VCA group 6 and 8 this was because of an non correct pluging of jumper under the patchbay "VCA 1-8", but when I full connect it, the sound no longer goes in LF/RF.

[christiancarvin]

I've done this (see attached picture) Every VCA group work now. But I think there must be a problem on VCA bus 0, no?

[horizonsound]

You look like you’ve just tied your master fader to the 0v rail by doing that, thus setting it at maximum volume.

[christiancarvin]

Surely a problem on 82E20 so, no? rude!

[horizonsound]

Lines 49 and 50 looked like they were soldered together, but a closer look says no.
Thus you should have no level coming out of the master busses at all, as it is not returned back to the console.

Use a different loop back plug on the VCA1-8 from another bucket, and see if the problem fixes itself.

[christiancarvin]

I've tried another jumper, the trouble still here: no sound on VCA 0 if I do that