SSlmixed.com Forum
Tech discussion => 4K,6K,8K Series => Topic started by: christiancarvin on June 22, 2021, 03:42:36 PM
-
Hello!
Does anyone knows what the letters "F" and "E" mean in the insert part? (see attached file)
Many thanks :)
-
Standard SSL layout patchbay rows.
-
Thanks Kevin :)
-
I'm trying to localise an unbalanced insert send point on the ssl module to pickup the signal there... Any idea of where I can get it? Thanks
-
its an SSL, you won't find an unbalanced point.
-
Oups! I mean a substraction of hot and cold, waltzingbear.
-
Looking at the schematics and block diagram, I believe the Insert Send is an impedance balanced output.
I'm sorry, but I do not understand what you mean by "subtraction of hot and cold". :-\
-
After all these years, I still feel like a rookie hahaha! The signal goes to the patch in a balanced way (+ and - separately), I was looking for a place on the module where the signal is not separated just before it goes to the pach. (My English is awful hahaha...I would understand you quit!!)
Thanks for your patience :)
-
As the Insert is only impedance balanced, you can pick up the full signal from Insert Pre/Post switch.
-
You learnt something to me, thanks a lot :) ! I didn't know about impedance balanced concept consequence on the final signal.
-
The letters E and F refer to the patchbay and also the 6 way Bicc connectors on the upper buscard (B, D, E, F, G, K) plus T which is the track remotes and just goes from the buscard to DL's 41 and 42).
I will try to detail the patchbay and DL wiring soon, when I have time but I need to pay bills for the moment so, can't spend the time on this right now, sorry (even though I have started some rough drawings already). I will try to post something soon regarding the patchbay wiring at least.
Night all (posted about 05 am when I should be fast asleep!)
-
Thanks Jiml, very interesting, I'll check your post!