SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: billythekid on August 10, 2016, 03:18:07 PM

Title: Bucket Not Sending to Stereo Bus Correctly **SOLVED**
Post by: billythekid on August 10, 2016, 03:18:07 PM

Hello, we have a 4064G+ w/ Ultimation

The first three buckets of channels are not sending to the stereo bus correctly. The left channel seems about 5db lower than the right channel, and it seems to be affected by frequency (ex. bass feels more out than a vocal, both are very noticeable though). There are four buckets to the left of our center section and this problem is specific to just the first three. External to monitors is functional.

We had a power outage two days ago so don’t know if something could have possibly happened to a power supply?

Any suggestions to try or information I can provide?

Title: Re: Bucket Not Sending to Stereo Bus Correctly
Post by: marcmozart on August 11, 2016, 09:00:07 AM

Check the ribbon cables on the bus-cards...

see
http://forum.sslmixed.com/index.php/topic,301.msg1368.html#msg1368

Title: Re: Bucket Not Sending to Stereo Bus Correctly
Post by: billythekid on August 11, 2016, 02:30:20 PM

That did it! Removed the S5 ribbon and was back to normal. Thank you so much for your help!!!

Title: Re: Bucket Not Sending to Stereo Bus Correctly
Post by: marcmozart on August 11, 2016, 05:51:39 PM

Quote from: billythekid on August 11, 2016, 02:30:20 PM

That did it! Removed the S5 ribbon and was back to normal. Thank you so much for your help!!!

Excellent, glad I could help. Thats why I love this place!