SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: xmax on May 02, 2017, 02:13:55 PM

Title: Let's talk coat hangers.
Post by: xmax on May 02, 2017, 02:13:55 PM

Ok I know we have gone over this before, but I'm still a little hazy.
A: The way I understand it, it is a mod to the channels, to make E
versions work with G 26 cards. Although I can't remember exactly
the details.
B: Does it address the busses and their summing?

Title: Re: Let's talk coat hangers.
Post by: xmax on May 02, 2017, 02:22:48 PM

Ok so I found this again, In it it refers to a E frame with G channels.
Is it the "frame" or wiring that is the important difference or the
26 card?

http://forum.sslmixed.com/index.php/topic,818.msg5422.html#msg5422

Title: Re: Let's talk coat hangers.
Post by: xmax on May 02, 2017, 02:24:05 PM

And what is the jumper actually shorting? LF and RF mix bus 0v to ground?

Title: Re: Let's talk coat hangers.
Post by: xmax on May 02, 2017, 02:51:08 PM

And what about E channels in a G frame or G 26 card?

Title: Re: Let's talk coat hangers.
Post by: xmax on May 02, 2017, 03:20:34 PM

Is it simply a resistor added to the negative leg of the mix out of the channel
and shorted (or added) with the jumper? 

Title: Re: Let's talk coat hangers.
Post by: Matt Sartori on May 02, 2017, 05:00:04 PM

HI Norman,

here is something from Keith (SSL Tech) from the group DIY Forum:

https://groupdiy.com/index.php?topic=24070.0


Matt

Title: Re: Let's talk coat hangers.
Post by: xmax on May 06, 2017, 01:27:37 AM

So it seems much deeper than switching the blue jumper!