SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: xmax on June 28, 2017, 05:55:26 PM

Title: 026 Card Edge connectors does anybody have a part #?
Post by: xmax on June 28, 2017, 05:55:26 PM

026 Card Edge connectors does anybody have a part #?
or the pin spacing or series of connectors? A client
has a intermittent connection and cleaning and reseating
is not fixing them...  :-X

Title: Re: 026 Card Edge connectors does anybody have a part #?
Post by: xmax on July 03, 2017, 07:48:40 PM

Nothing? :-\

Title: Re: 026 Card Edge connectors does anybody have a part #?
Post by: Chris Simon on July 04, 2017, 03:18:15 PM

Something similar to this?

https://www.digikey.ca/products/en/connectors-interconnects/card-edge-connectors-edgeboard-connectors/303?k=&pkeyword=&FV=fffc0023%2C16000b8%2C1640001%2C1680002%2C8600004%2Cffe0012f%2C1140050&mnonly=0&ColumnSort=0&page=1&stock=1&quantity=0&ptm=0&fid=0&pageSize=25 (https://www.digikey.ca/products/en/connectors-interconnects/card-edge-connectors-edgeboard-connectors/303?k=&pkeyword=&FV=fffc0023%2C16000b8%2C1640001%2C1680002%2C8600004%2Cffe0012f%2C1140050&mnonly=0&ColumnSort=0&page=1&stock=1&quantity=0&ptm=0&fid=0&pageSize=25)

I know the pin spacing is 0.1", not sure if the row spacing of 0.2" is correct. I haven't used these connectors in a 651, but I used them for edge connectors on a SL612 test jig.

Chris

Title: Re: 026 Card Edge connectors does anybody have a part #?
Post by: xmax on July 19, 2017, 04:05:20 AM

Rad! Thanks! N

Title: Re: 026 Card Edge connectors does anybody have a part #?
Post by: xmax on August 01, 2017, 01:55:25 PM

These worked! They did need the mounting tabs removed
and 2 pins pulled to add a "key" for the card key-way.
otherwise the cards edge pins can touch 2 contacts at
once and short every single pin! I cut a small piece of
old PCB to make the "key". 

Title: Re: 026 Card Edge connectors does anybody have a part #?
Post by: Chris Simon on August 01, 2017, 09:29:34 PM

I made my keys out of small pieces of plastic that I carved and glued in place. Glad it worked out.

Chris

Title: Re: 026 Card Edge connectors does anybody have a part #?
Post by: xmax on August 02, 2017, 03:03:59 AM

No thank you!