SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: christiancarvin on June 17, 2021, 08:09:52 AM

Title: Jumpers for computer >>> SOLVED <<<
Post by: christiancarvin on June 17, 2021, 08:09:52 AM

Hello every one!

I had a problem with VCA group 6 and 8 this was because of an non correct pluging of jumper under the patchbay "VCA 1-8", but when I full connect it, the sound no longer goes in LF/RF.

Title: Re: Jumpers for computer
Post by: christiancarvin on June 17, 2021, 08:55:20 AM

I've done this (see attached picture) Every VCA group work now. But I think there must be a problem on VCA bus 0, no?

Title: Re: Jumpers for computer
Post by: horizonsound on June 17, 2021, 09:16:33 AM

You look like you’ve just tied your master fader to the 0v rail by doing that, thus setting it at maximum volume.

Title: Re: Jumpers for computer
Post by: christiancarvin on June 17, 2021, 09:36:43 AM

Surely a problem on 82E20 so, no? rude!

Title: Re: Jumpers for computer
Post by: horizonsound on June 17, 2021, 09:58:10 AM

Lines 49 and 50 looked like they were soldered together, but a closer look says no.
Thus you should have no level coming out of the master busses at all, as it is not returned back to the console.

Use a different loop back plug on the VCA1-8 from another bucket, and see if the problem fixes itself.

Title: Re: Jumpers for computer
Post by: christiancarvin on June 17, 2021, 10:00:36 AM

I've tried another jumper, the trouble still here: no sound on VCA 0 if I do that