SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: Original_Box on September 26, 2023, 08:19:58 PM

Title: 4000G+ cut switch illumination issue
Post by: Original_Box on September 26, 2023, 08:19:58 PM

Hello All!

Hoping someone has some insight into this as I don't, but believe there is a global issue that I am missing. Below is what I can deduce:

Console: 4048G+ VU's with Atomic PS and Tangerine TAI automation

Issue: Engaging the channel cut switches cut the audio, but the switches do not illuminate.

Some notes on overall behavior.
   Soloing any channel, the cuts illuminate as normal
   The center section cuts illuminate normally
   Installing the computer bypass yields normal operation
   

Thank you all for any wisdom

Aaron

Title: Re: 4000G+ cut switch illumination issue
Post by: Alex J Kramer on December 01, 2024, 06:36:03 PM

Same s**t, unfortunately :(
Can anyone help us?

Title: Re: 4000G+ cut switch illumination issue
Post by: Pinebox on December 02, 2024, 03:38:02 PM

Check the fets on the VCA cards.