SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: Jdm5149 on March 10, 2026, 12:41:48 AM

Title: SSL 612 test jig
Post by: Jdm5149 on March 10, 2026, 12:41:48 AM

Waiting on ssl 612 to be delivered. Any suggestions on what othe tools needed. I think it has original instructional manual also. Still gonna be awhile before I get my console out of storage and installed. Thinking of building a holder also to place channels in while testing. Hopefully I can start picking out problems before finally installing

Title: Re: SSL 612 test jig
Post by: tlmaen on March 10, 2026, 11:37:40 AM

Hi, would best interested in the Manual! Have a 612 as well.
thanks!

Title: Re: SSL 612 test jig
Post by: Dave Dicson on March 10, 2026, 05:36:49 PM

You will need a + & - 18V. DC power supply to run the test jig & it also powers module. I run mine from a 2A power supply. It is enough power to run a SSL 4K & 9K modules. No phantom power.

Title: Re: SSL 612 test jig
Post by: Jdm5149 on March 10, 2026, 06:07:37 PM

K. Great. Gotta buy another or find one that’s in storage.. I’m thinking instructional manual will explain a lot. I’ve seen a video showing how Mark1 has the channel on a setup and connected to some sort of measuring program on a computer. Guessing a ociliscope.  After a year and a half of waiting at least I can start to see if these channels are going to be a problem

Title: Re: SSL 612 test jig
Post by: horizonsound on March 10, 2026, 08:31:21 PM

I would expect it is just the calibration manual, which is available in the groups files location

https://www.dropbox.com/scl/fo/sdfzbfdnlpv2q3ig1tryf/AIiwd2g9Au5F9WubW49ryJQ/SL4000?dl=0&rlkey=qpw07rvug72ghe1ciuzygcsdg&subfolder_nav_tracking=1 (https://www.dropbox.com/scl/fo/sdfzbfdnlpv2q3ig1tryf/AIiwd2g9Au5F9WubW49ryJQ/SL4000?dl=0&rlkey=qpw07rvug72ghe1ciuzygcsdg&subfolder_nav_tracking=1)

As mentioned in the email, it does not cover all the required tests or calibrations.

Anthony.

Title: Re: SSL 612 test jig
Post by: Jdm5149 on March 13, 2026, 08:19:49 PM

Well a totally different jig arrived. A sl613e with a totally different circuit board than pictured.  Even no manual. Wtf??  My console has 24 g 2 stereo 14 e brown and black.  Is this even useful ??  Doesn’t even power on with power supply that was given

Title: Re: SSL 612 test jig
Post by: Dave Dicson on March 13, 2026, 09:36:26 PM

You should post pic(s) of it.

Title: Re: SSL 612 test jig
Post by: Jdm5149 on March 13, 2026, 11:08:18 PM

Got it working.  Faulty power connector in unit.  Been told 613 is best so I guess I got lucky. lol !!  Building a wooden station to mount board and jig with power supply.  Still no manual but at least I can start and see how these channels light up !!  It’s been a year and a half since I bought and placed in storage.  Looking to move south soon so hopefully by July I’ll have console up and running. Any test pointers til then would be much appreciated.