SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: jwhmca on July 02, 2013, 04:51:56 PM

Title: SSL 6000 Test Jig same as 4000?
Post by: jwhmca on July 02, 2013, 04:51:56 PM

I have some 6000 channels I need to work on and have the test jig for the 4000. Are they compatible?

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: sintech on July 03, 2013, 07:40:21 AM

Mix A = LF,RF

Mix B = LB, RB

Who know's about Mix C, love to check out a 6k service manual relating to A,B,C busses and Lower Bus card pinout.

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: jwhmca on July 03, 2013, 04:11:31 PM

So everything else is the same? I don't want to hurt anything?

Did SSL make a separate test jig for the 6000?

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: sintech on July 03, 2013, 06:58:46 PM

Hi you won't hurt anything, as the power rails will all be the same, and it's the same 611 motherboard for sure

I'd love to see the S5E or Lower Bus card info from the 6k service manual.

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: sintech on July 04, 2013, 08:41:02 AM

Got some service information:

Mix A and B are on S5E and mirror the 4k's LF,RF and LB,RB quad bus.

Mix C is on S3E, Right is Pin 2, Left is Pin 6.

So you won't hurt the channels in any way using the Test Jig.

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: Matt Sartori on July 04, 2013, 09:52:35 AM

Quote from: sintech on July 04, 2013, 08:41:02 AM

Got some service information:

Mix A and B are on S5E and mirror the 4k's LF,RF and LB,RB quad bus.

Mix C is on S3E, Right is Pin 2, Left is Pin 6.

So you won't hurt the channels in any way using the Test Jig.

Ehi Andy have you sourced any manual for it?
M.

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: sintech on July 04, 2013, 10:13:59 AM

Hey Mattia,

Got the info from a 1982 service amendment, Rev GH included the reassigning of the pinouts to include the 6000 Hex bus as standard, so all 4/6/8k are pin compatible.


(http://i44.photobucket.com/albums/f23/sin-tech/photo-45_zpsa6ffdc6f.jpg) (http://s44.photobucket.com/user/sin-tech/media/photo-45_zpsa6ffdc6f.jpg.html)

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: jwhmca on July 04, 2013, 03:38:46 PM

Quote from: sintech on July 04, 2013, 10:13:59 AM

...so all 4/6/8k are pin compatible.

So, you can put 6000 etc channels strips in a 4000? I think that would be the best way to test it?

Title: Re: SSL 6000 Test Jig same as 4000?
Post by: sintech on July 04, 2013, 04:07:54 PM

Sure, that will work fine, here it's 4k sitting next to 8k without issues.