SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: MikeSynthesizer on April 28, 2014, 02:27:33 PM

Title: Recap Questions for CFE82E10 Dynamics SPC-BBT
Post by: MikeSynthesizer on April 28, 2014, 02:27:33 PM

I'm in the process of recapping some SSL 4000E cards and some bonehead put polarized 100uf 10v caps in the place of the 100uf 25v NP/BP caps.  Could I subsitute 220uf 10v BP/NP caps in there without problems or should I use 100uf 25v BP/NP.  I can't really measure it because the cards are all I've got and I don't have the schematics either.

Title: Re: Recap Questions for CFE82E10 Dynamics SPC-BBT
Post by: waltzingbear on April 28, 2014, 04:18:41 PM

either voltage rating is technically OK.

differences beyond that get into religion.

Alan

Title: Re: Recap Questions for CFE82E10 Dynamics SPC-BBT
Post by: marcmozart on April 28, 2014, 07:41:42 PM

The schematics can be found here:

http://forum.sslmixed.com/index.php?topic=292.0

Schematics for the Dynamics go back to 1984, there were only small changes.