SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: jwhmca on May 09, 2014, 06:20:02 AM

Title: 4k 611 module compressor LEDs lit all the time
Post by: jwhmca on May 09, 2014, 06:20:02 AM

I have swapped 82E10 cards and the card seems to not be causing the problem.

The ratio control lights up the LEDs even when the DYN switch is out. It seems to engage very quickly too... and go all the way red. Any thoughts?

Title: Re: 4k 611 module compressor LEDs lit all the time
Post by: michaeldtech on May 13, 2014, 08:08:23 PM

Check the module fuses?  Is the OL LED on as well?
Make sure all module voltages are proper.
Mike

Title: Re: 4k 611 module compressor LEDs lit all the time
Post by: ULH on May 24, 2014, 08:45:37 PM

Hi guys

First post here. Have been lurking a bit and very happy for this forum during our recent SSL hunt. We just acquired a SSL 4064G+ and one of the channels have the exact same fault as described above. jwhmca did you find a solution?

Cheers,
Uffe

Title: Re: 4k 611 module compressor LEDs lit all the time
Post by: sintech on May 24, 2014, 09:00:19 PM

Hi Uffe, does the fault follow the Dynamics card, or the 611 module?

Title: Re: 4k 611 module compressor LEDs lit all the time
Post by: ULH on May 25, 2014, 01:13:07 AM

We have just moved the console and are cleaning every inch of it so right now it's not connected up so I can't test this. I will try it out when it's all up and running :-)


Sent from my iPad using Tapatalk

Title: Re: 4k 611 module compressor LEDs lit all the time
Post by: jwhmca on May 28, 2014, 01:02:36 AM

Mine went away by itself from moving wires around!!! I think!?!

I hate those!!!

Title: Re: 4k 611 module compressor LEDs lit all the time
Post by: ULH on May 28, 2014, 09:48:19 AM

Thanks for the reply. I'll try the same tactics :-)