SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: jwhmca on October 29, 2014, 03:48:15 PM

Title: Bypassing the Moving Fader card for 613/612 test jig?
Post by: jwhmca on October 29, 2014, 03:48:15 PM

Hi Guys,

So how/which part do you "bypass/jump" to run a Ultimation channel strip with the moving fader card on the 613/612 test jig?

Title: Re: Bypassing the Moving Fader card for 613/612 test jig?
Post by: xmax on January 15, 2016, 04:53:32 PM

You just need to jump in and out on the fader ribbon for "motors on" mode.
I'm still trying to figure out "motors off".  8)

Title: Re: Bypassing the Moving Fader card for 613/612 test jig?
Post by: xmax on January 15, 2016, 05:15:23 PM

So it looks like we just need to steal the 0-5V vca voltage from the non-ultimation pins
on the test jig "backplane" and trigger vca mode on the ribbon. Details to follow.  :P