SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: kilmister on January 18, 2015, 12:49:32 PM

Title: Dynamic IN switch schematic **SOLVED**
Post by: kilmister on January 18, 2015, 12:49:32 PM

Hi folks.

Having a small issue with Dynamic IN switch at one channel of 4040G+.
Couldn't find schematic for switch board in my Service Manual. Also noticed I don't have page 1-16 which might be exactly the page I'm looking for.
Anyone able to scan it?

Cheers,
Paavo

Title: Re: Dynamic IN switch schematic
Post by: pascal.verdet on January 18, 2015, 01:28:31 PM

Hi Paavo,

Please find attached file
Cheers,

Pascal

Title: Re: Dynamic IN switch schematic
Post by: kilmister on January 18, 2015, 02:24:54 PM

Thanks for your reply Pascal.
Schematic you sent is for eq section and can be found in Service Manual at page 1-17. This leads me to believe that missing page 1-16 is for dynamics switching. Please correct me if I'm wrong.

Cheers,
Paavo

Title: Re: Dynamic IN switch schematic
Post by: pascal.verdet on January 19, 2015, 08:42:34 AM

Hi,

Please note that the diagram is (the same) identical for both ...
Regards,

Pascal

Title: Re: Dynamic IN switch schematic
Post by: kilmister on January 20, 2015, 01:20:19 AM

Really? I'm suprised because there's no mention about dynamics or switch functions in schematic at page 1-17 and eq card has a bit different connectors.

Anyone able to check is there page 1-16 at all please?

-Paavo

Title: Re: Dynamic IN switch schematic
Post by: pascal.verdet on January 20, 2015, 09:59:53 AM

Hi Paavo,

I re upload the schematic, for the both switch. It's the same, as described bellow

SSL Solid State Logic 82E08 Dynamics Switch Assembly used in SSL 4000 and 6000-series. New old stock. Part number 622007E2. LED colors are green, yellow, red.

This switch may also be a substitution for the EQ switch as they appear identical and bear the same PC board number 82E08M382.

Title: Re: Dynamic IN switch schematic
Post by: pascal.verdet on January 20, 2015, 10:04:48 AM

And I retrieve page 1-16 ... It's the same ;-)

Cheers,
Pascal

Title: Re: Dynamic IN switch schematic
Post by: kilmister on January 20, 2015, 10:15:14 AM

Thanks Pascal.

In the console I'm talking about boards are bit different, eq switches has 4-way molex on it while dynamics has only Varelcos. Dunno if different eq boards needs different way of connections. IIRC console is loaded with 292's. Nonetheless, functions seems to be same regarding second schematic, very helpful so thanks again.

Cheers,
Paavo