SSlmixed.com Forum

Market Place => Sell-Buy => Topic started by: aaladhamy on April 12, 2015, 11:55:29 PM

Title: Wanted - Ultimation Motor PSU + Channel Extender
Post by: aaladhamy on April 12, 2015, 11:55:29 PM

Hey all!

Looking for a power supply for the Ultimation Motors + a channel extender. Let me know if anyone wants to part with theirs or has any leads!

Thanks

- Ayad

Title: Re: Wanted - Ultimation Motor PSU + Channel Extender
Post by: Artur D'Assumpção on April 13, 2015, 09:29:08 AM

Hi,

Check this out: http://forum.sslmixed.com/index.php?topic=760.0

I don't know if this is what you're looking for when you referred to channel extender, but If you're interested drop me an email to adassumpcao@gmail.com

Cheers,

Artur

Title: Re: Wanted - Ultimation Motor PSU + Channel Extender
Post by: aaladhamy on April 14, 2015, 10:22:17 PM

Hey Artur,

Thanks for replying. Im looking for a 611E channel extender, not the Ultimation one. That looks great though!

THe other thing I am looking for is the PSU to power the faders. I dont have the CPU and want to get the system you are developing, but assuming I need the PSU to make it work!

Thanks again

Title: Re: Wanted - Ultimation Motor PSU + Channel Extender
Post by: Artur D'Assumpção on April 15, 2015, 09:23:25 AM

Yes, you'll need both PSUs, the motors PSU and the fader electronics PSU.

Title: Re: Wanted - Ultimation Motor PSU + Channel Extender
Post by: Artur D'Assumpção on April 15, 2015, 09:55:18 AM

Btw, is your console ready for Ultimation?

Do you have all the other stuff, besides the PSUs?

Title: Re: Wanted - Ultimation Motor PSU + Channel Extender
Post by: sintech on April 15, 2015, 10:36:10 AM

here's one for sale:

http://www.ebay.co.uk/itm/Solid-State-Logic-SSL-Ultimation-Power-Supply-SL569-/271839387888?&_trksid=p2056016.m2516.l5255

Title: Re: Wanted - Ultimation Motor PSU + Channel Extender
Post by: aaladhamy on May 06, 2015, 10:52:02 PM

Thanks for the link! I tried to buy but they wont ship to the US. I sent them an email.

Artur, I have the fader electronics PSU. What else would I need (asides from the SL569) to run ultimation?

Thanks for the info!

Title: Re: Wanted - Ultimation Motor PSU + Channel Extender
Post by: Artur D'Assumpção on May 07, 2015, 12:32:05 PM

Hi,

I don't know exactly what you're trying to do, but If you're retrofitting Ultimation into a VCA console there's lots of things you need to be able to do it. This can also differ if this is an E or G console. I have scanned a retrofit manual that I can share with you if needed.

But in terms of hardware you basically need:

- VCA card per channel (these are different than the non-utlimation VCA card)
- Ultimation faders
- Fader bus card for each bucket (different than the VCA faders)

- New Input/Output computer cards
- New CA bus card (replaces the Light and Switches card)

- Ultimation fader motor PSU (and cabling)
- Electronics fader motor PSU

Finally you'll need the Ultimation software to run the computer. This is also depending on the version of computer and floppy drive you have. ;)

If it's indeed a retrofit you'll also need to update the connector panel under the patchbay to be able to input the motors power.

I think Andy knows someone that's selling a complete Ultimation system if you need.

Cheers,

Artur