SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: jtstudios on July 22, 2015, 01:30:21 PM

Title: 4064 G+ Quad Buss Meters Hover at 0 dB
Post by: jtstudios on July 22, 2015, 01:30:21 PM

I hope you all are making mega hits on your SSL desks today.

My console is doing something weird. The main meters hover at 0 dB.  The console passes a clean signal and otherwise works.

Any ideas?

Thanks,
JT
www.jtstudios.net/videos

Title: Re: 4064 G+ Quad Buss Meters Hover at 0 dB
Post by: sintech on July 22, 2015, 02:55:26 PM

Maybe a fault on the meter distribution card, audio will be completely unaffected.

I'd maybe trace the voltage back from the meter to the source of the problem. Is it on all meters (LF,RF,LB,RB)?

Title: Re: 4064 G+ Quad Buss Meters Hover at 0 dB
Post by: jtstudios on July 27, 2015, 05:19:25 AM

Thanks.

Yes it was all the quad buss meters.  But it sorted itself out, thankfully. 

Ever since we installed the Atomic S2 PSU, the console has been functionally reliable and sounding better than ever.

An indie project we just co-produced here is getting some attention from DJs over there in the UK, Germany, Spain, Portugal, Italy, Netherlands.  It was fun to see this DJ play the song and really get into it:

http://www.3fm.nl/video/all/show/77977 (http://www.3fm.nl/video/all/show/77977)

We hope to send the band to the UK early next year.

Thanks for the reply!

JT

Title: Re: 4064 G+ Quad Buss Meters Hover at 0 dB
Post by: Artur D'Assumpção on July 27, 2015, 10:31:06 AM

Beautiful console! :)