SSlmixed.com Forum

Tech discussion => 4K,6K,8K Series => Topic started by: lukeaudio on November 09, 2015, 01:24:09 AM

Title: output switch help **SOLVED**
Post by: lukeaudio on November 09, 2015, 01:24:09 AM

Hi guys,

I need to know, where I can buy this switch (output switch ). See the picture ....

Title: Re: output switch help
Post by: Artur D'Assumpção on November 09, 2015, 02:10:28 PM

Have you tried the usual suspects? Recycled Audio, Funky Junk?

Cheers,

Artur

Title: Re: output switch help
Post by: lukeaudio on November 09, 2015, 02:54:10 PM

I'll try  ....
thank

Title: Re: output switch help
Post by: Matt Sartori on November 09, 2015, 04:10:55 PM

I think you can use a normal ALPS switch ?

http://uk.farnell.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=15001&langId=44&urlRequestType=Base&partNumber=1123859&storeId=10151

something like this?

Mattia.

Title: Re: output switch help
Post by: lukeaudio on November 10, 2015, 01:08:28 AM

The ALPS switch is a little bit smaller than the other

Title: Re: output switch help
Post by: jwhmca on November 11, 2015, 02:43:07 AM

The switch used on the back of the AUX SEND controls
http://www.mouser.com/ProductDetail/CK-Components/F4UEE/?qs=sGAEpiMZZMvxtGF7dlGNpgCwsFGkmTT9zvqCi5GqOCM%3d

The switch used for like IN- PRE-SPLIT and PHASE "4-Pack"
http://www.mouser.com/ProductDetail/CK-Components/F6UEE/?qs=sGAEpiMZZMvxtGF7dlGNpkvuTQHbvtlSnge8p3X2G5o%3d

The switch used for the EQ and DYNamics "3-way"
http://www.mouser.com/ProductDetail/CK-Components/51902-F8UEE/?qs=sGAEpiMZZMvxtGF7dlGNpowNqRnK0sWOxGsEJnHC8X0%3d

Double Check and make sure I didn't get the numbers screwed up. :-)

If you ad a "TB" to a part number like F4UEETB, you will get a "seal" on the Top and Bottom. There are also ones with Gold plating.

Title: Re: output switch help
Post by: lukeaudio on December 22, 2015, 10:12:48 PM

many thanks
jwhmca

Title: Re: output switch help
Post by: xmax on January 02, 2016, 11:19:52 PM

jwhmca; I believe the eq and dynamics use the F6, I don't recall any of the switches being F8.

Title: Re: output switch help
Post by: jwhmca on January 24, 2016, 05:13:40 AM

Good catch,

Should be a F6UEE 3PDT

Title: Re: output switch help **SOLVED**
Post by: MartyAckerman on January 31, 2023, 01:20:13 AM

Hey all,

i know this is an old thread, but regarding the switch mentioned above:

Quote

The switch used on the back of the AUX SEND controls
http://www.mouser.com/ProductDetail/CK-Components/F4UEE/?qs=sGAEpiMZZMvxtGF7dlGNpgCwsFGkmTT9zvqCi5GqOCM%3d

This is the switch that engages the aux sends, correct? So it would be attached to bottom of the through-shaft pots for each of the aux sends on a 4k/6k? Can anyone confirm or deny if this is the best modern replacement?

Title: Re: output switch help **SOLVED**
Post by: Dave Dicson on January 31, 2023, 04:39:12 PM

This is true. It is a DPDT alternate action push button switch.

Title: Re: output switch help **SOLVED**
Post by: MartyAckerman on January 31, 2023, 06:13:51 PM

Thank you!