« previous next »
Pages: 1 [2]

Author Topic: Group and Master Status Switches among other issues ... :)  (Read 19466 times)

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Group and Master Status Switches among other issues ... :)
« Reply #15 on: December 30, 2012, 01:09:19 PM »
Hi, great!!

Regarding the Left meter, worth reseating the 10 way ribbon at the meter end, and also maybe at the distribution end also.
Logged

Rick Carson

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-1
Re: Group and Master Status Switches among other issues ... :)
« Reply #16 on: January 02, 2013, 01:04:48 AM »
Hey Thanks again, I just tried it at the meter end and there was no change where exactly is the distribution end located at.


Thanks a ton,


Rick Carson
Logged

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Group and Master Status Switches among other issues ... :)
« Reply #17 on: January 02, 2013, 07:47:28 AM »
depending on the console, it maybe under the table on the Patchbay, or maybe at the back of the console behind one of the panels.

It looks like this:



You should also swap Left and Right ribbons at the meter end to rule out any problems, depending on the age the Console/meter card, will go from a Zener Diode pair protecting the movement, to a buffered card with a TL072 op-amp.
« Last Edit: January 02, 2013, 08:00:24 AM by sintech »
Logged
Pages: 1 [2]
« previous next »