Author Topic: WTB Cannon DL96 snakes  (Read 6219 times)

Kevrok

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • Des Moines, Iowa
    • Redd 7 Studio
WTB Cannon DL96 snakes
« on: October 06, 2016, 07:35:00 AM »
Looking for some Cannon DL96 Snakes for my SSL 4000 console. Any lengths from 3' and up...16, 24, or 32 channel. Not really worried about the fan out end as far as what is or isn't pre-wired. Just need a couple to wire up a couple new AD/DA converters

Monitor Man

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • California, USA
Re: WTB Cannon DL96 snakes
« Reply #1 on: October 31, 2016, 06:00:07 PM »
I have a couple for sale $250 ea.  20 ft lengths.

Clip6

  • Sr. Member
  • ****
  • Posts: 311
  • Karma: +8/-1
Re: WTB Cannon DL96 snakes
« Reply #2 on: November 09, 2016, 03:40:10 AM »
I've been where you are so this is what I did.

Go on Ebay and buy 20-25 foot 24 channel mogami snakes then send them to Chris at Redco.

You might find some DL connectors raw but that will be harder than finding raw snakes.

Once you get the cables and DL send them to Chris to wire up.

Just saw this. Good price. You'll need at least 6 to start 9 with just a little outboard.

http://www.ebay.com/itm/CANNON-DL2-96P-96-PIN-CONNECTOR-WITH-HANDLE-/262704308740?hash=item3d2a65a204:g:kbgAAOSwo4pYDB68

« Last Edit: November 09, 2016, 03:55:01 AM by Clip6 »

Monitor Man

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • California, USA
Re: WTB Cannon DL96 snakes
« Reply #3 on: November 09, 2016, 06:37:40 PM »
Looking for some Cannon DL96 Snakes for my SSL 4000 console. Any lengths from 3' and up...16, 24, or 32 channel. Not really worried about the fan out end as far as what is or isn't pre-wired. Just need a couple to wire up a couple new AD/DA converters
I have two 24 channles with DL96 245.00 ea. 20 ft long.

TheFastVinny

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
  • 6154814014
    • Rhoades Audio Designs
Re: WTB Cannon DL96 snakes
« Reply #4 on: November 11, 2016, 11:59:34 PM »
Don't know if you are still looking or not, but I have a couple DL snakes that are left over from a 9000J Install. 24 and 32 Channels @ their standard 15 Meters in length, Oxygen Free cable. Let me know if you are still in need.

Vince Fast
615)481-4014


jimlfixit

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 373
  • Karma: +45/-0
    • Maidenhead, Bucks, UK
Re: WTB Cannon DL96 snakes
« Reply #6 on: November 23, 2016, 09:41:28 PM »
Hi chaps. Yes, there are some good deals available on eBay for DL looms (snakes). What I would recommend though is, if you buy them, take the backshell off and examine the wiring to see if it looks good regarding the crimping. Sometimes, if the wiring method is not that good, you could end up with wires coming out or even shorting between circuits, especially if no heatshrink or rubber sleeve has been used. Just beware, that's all.

If you dudes need any wiring work done, I am available and, to those of you in most of Europe or the USA, my prices should be cheaper with the GB£ going down around 10% against those currencies since Brexit.
« Last Edit: January 18, 2017, 02:40:31 PM by jimlfixit »

Clip6

  • Sr. Member
  • ****
  • Posts: 311
  • Karma: +8/-1
Re: WTB Cannon DL96 snakes
« Reply #7 on: January 07, 2017, 01:10:07 AM »
Bump more DL snakes on Ebay cheap.