Console finally upright …..

[Jdm5149]

Well after 2 years in storage I finally got to put my 4000e/g on its legs.  I bought it 2 years ago driving 24 hours with my wife to purchase. And yesterday it was both of us putting it upright. In these last 2 years I have posted many times and I would like to thank everyone that responded to my posts. I had many questions over the years. I’ve cleaned every channel and redid every fader. They were really bad and now feel like new. Got a Mpower and one computer running so I’ll be booting it up hopefully this week. 👍. I’ll post some pics soon …..

[Jdm5149]

Pics soon. Turned console on and as expected issues.  I’ve changed a few bus switch’s on test jig for a few channels prior but now with all channels in I have about 30 to swap out. I might have just about that many spare 👍.  The main issue are there are a few channels where the cut is constantly on and also I’m unable to cut the rest of the channels. I don’t think they can all be bulbs.  Any ideas?  I also have to set up the program disc to suit my board. I took pics of my 8” floppy settings so I’ll do that next. Also waiting for wd40 to work on of course one screw on the center section to unscrew.  lol

[Richealey]

I suggest installing the computer bypass connectors. That way you can troubleshoot the cut issues independent of the computer.
If you still have issues, you know those issues are within the console itself.

[Jdm5149]

Will do. Thanks