Author Topic: Dramastic SSL Video XGA converter alternative  (Read 16447 times)

sintech

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 839
  • Karma: +61/-0
    • Bristol, UK
Re: Dramastic SSL Video XGA converter alternative
« Reply #15 on: February 09, 2014, 03:40:14 PM »
RGB from the TR graphics card, and Primary B/W are all fed into the video distribution/switcher card, this then feeds the BNC back panel.

So 99% of the time, the Large TR monitor is infact just viewing Primary B/W feed into the Green component feed, (hence the green colour)

alchematic

  • Newbie
  • *
  • Posts: 12
  • Karma: +0/-0
    • Nashville. TN, USA
Re: Dramastic SSL Video XGA converter alternative
« Reply #16 on: April 20, 2014, 08:36:50 PM »
Hi. I just found this forum.  Awesome. I have been wanting to get an interface to hook up my TR computer to a xvga monitor. The price of the Dramastic box was a bit high so I looked around and found this box: Ambery RGBS-CV at $85 US

http://www.ambery.com/rgrgtotvcosc.html

Looks like it should do it.  Any opinions? It seems to meet all the specs like 15 k scan rate and sync on green.  Hope to be getting it this month and will post my results, but would like feedback  you all too.

flog

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • reeltime audio
Re: Dramastic SSL Video XGA converter alternative
« Reply #17 on: August 12, 2014, 04:07:46 PM »
^^^did you get this box to work? 

zane

  • Newbie
  • *
  • Posts: 36
  • Karma: +0/-0
    • NYC
Re: Dramastic SSL Video XGA converter alternative
« Reply #18 on: August 12, 2014, 06:54:59 PM »
i would love to know this too, as my TR display is still not happening....:(  (well-- the R and B are....)

flog

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • reeltime audio
Re: Dramastic SSL Video XGA converter alternative
« Reply #19 on: August 13, 2014, 12:18:55 AM »
Just bought a NEC multisync 46" monitor and hooked it up.  The bottom has RGB coax connectors as well as many many other inputs.
After some messing with horizontal and vertical controls it seems to work ok  :D