« previous next »
Pages: [1]

Author Topic: Just a few questions  (Read 4198 times)

Andygriffiths

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • Brisbane, Australia
    • Andy's custom Cables
Just a few questions
« on: May 03, 2016, 04:08:10 AM »
Hello, I'm new to operating an SSL4000E. I have a few questions I need answered. I have just installed a 4040E for a client through my custom cable business. He has now asked me to finish of the install which is but I've never used a SSL before.

Q1. So the main studio monitors are connected to the FL,FR outputs on the master DL loom? He has a small pair connected to the mini L,R on the DL loom.

Q2. The console PSU has dropped 48v, so phantom power doesn't work on the console. Has anyone had this happen?

Q3. How do I patch in outboard FX units as the console only has cue sends on the patchbay & not aux sends.

I leave it here for the moment. Thanks for your time
Logged

Showcase

  • Full Member
  • ***
  • Posts: 246
  • Karma: +4/-1
    • Dreamix
Re: Just a few questions
« Reply #1 on: May 06, 2016, 10:39:31 PM »

Q2 Could be different problems, maybe a faulty regulator card in the PSU, maybe some transistors are blown...

Q3 The patchbay could refer to the aux sends as "ECHO SENDS"
Logged

Dan Korneff

  • Jr. Member
  • **
  • Posts: 76
  • Karma: +1/-0
Re: Just a few questions
« Reply #2 on: May 07, 2016, 06:14:24 AM »
Quote from: Andygriffiths on May 03, 2016, 04:08:10 AM

Q2. The console PSU has dropped 48v, so phantom power doesn't work on the console. Has anyone had this happen?


Check the regulator card for 48V in your PSU. Probably blew a pico fuse.
Logged
Pages: [1]
« previous next »