« previous next »
Pages: [1]

Author Topic: SL 611S channel inserts issue >>SOLVED<<  (Read 4473 times)

oyanliz

  • Full Member
  • ***
  • Posts: 209
  • Karma: +1/-0
SL 611S channel inserts issue >>SOLVED<<
« on: April 20, 2017, 11:05:44 PM »
Hi all,

I am not able to run the inserts on the stereo channels. I am able to configure L-R inputs, but I connect the patch as explained in the manual without success.

Can someone give me a hand please?

Thanks to all in advance.

Best regards.

« Last Edit: April 22, 2017, 11:39:34 AM by oyanliz »
Logged

Chris Simon

  • Full Member
  • ***
  • Posts: 102
  • Karma: +6/-0
Re: SL 611S channel inserts issue
« Reply #1 on: April 21, 2017, 09:06:13 AM »
Err, isn't that wrong? Insert send and return for the left channel use insert send and return. Insert send on the right channel is group out, and insert return is group monitor input. That's what I'm used to.
Hope this helps.

Chris
Logged

oyanliz

  • Full Member
  • ***
  • Posts: 209
  • Karma: +1/-0
Re: SL 611S channel inserts issue
« Reply #2 on: April 22, 2017, 11:38:54 AM »

Hi Chris,

It worked! Now I am able to connect the inserts!!

Thank you very much!

Regards!

Oyan
Logged

Chris Simon

  • Full Member
  • ***
  • Posts: 102
  • Karma: +6/-0
Re: SL 611S channel inserts issue >>SOLVED<<
« Reply #3 on: April 22, 2017, 12:01:25 PM »
You're welcome. I had to think about that one for a bit.
Logged
Pages: [1]
« previous next »