Author Topic: Recap Questions for CFE82E10 Dynamics SPC-BBT  (Read 4111 times)

MikeSynthesizer

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Recap Questions for CFE82E10 Dynamics SPC-BBT
« on: April 28, 2014, 02:27:33 PM »
I'm in the process of recapping some SSL 4000E cards and some bonehead put polarized 100uf 10v caps in the place of the 100uf 25v NP/BP caps.  Could I subsitute 220uf 10v BP/NP caps in there without problems or should I use 100uf 25v BP/NP.  I can't really measure it because the cards are all I've got and I don't have the schematics either.

waltzingbear

  • Sr. Member
  • ****
  • Posts: 329
  • Karma: +13/-0
    • Portland, Oregon
    • Waltzing Bear Audio
Re: Recap Questions for CFE82E10 Dynamics SPC-BBT
« Reply #1 on: April 28, 2014, 04:18:41 PM »
either voltage rating is technically OK.

differences beyond that get into religion.

Alan
Alan Garren
Waltzing Bear Audio

marcmozart

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +29/-0
    • Frankfurt/Germany
    • Mozart & Friends
Re: Recap Questions for CFE82E10 Dynamics SPC-BBT
« Reply #2 on: April 28, 2014, 07:41:42 PM »
The schematics can be found here:

http://forum.sslmixed.com/index.php?topic=292.0

Schematics for the Dynamics go back to 1984, there were only small changes.
1992 SSL 4048 G-Series
Mix Engineer Blog
http://www.mixedbymarcmozart.com